Electric Oil Well Pump BMD002
Whatsapp Order
An electric oil well pump refers to a type of artificial lift system used in the petroleum industry to extract crude oil from underground reservoirs. This pump is powered by electricity and is typically installed in oil wells to enhance the flow of oil to the surface. The electric oil well pump operates by converting electrical energy into mechanical energy, which is then used to lift the oil from the wellbore to the surface for further processing and transportation. This technology is crucial for maximizing oil production and maintaining the overall efficiency of oil extraction operations.
1. DC electric pump, DC12V,200W
2. Max suction：3M
3. Max head：5M
4:.Rotor diameter 52.5mm
5. Accessories: one single pump, one self-sealing oil
Compare
Oil well pump uses
- Artificial Lift: Electric oil well pumps are a key component of artificial lift systems. They help overcome the natural decline in reservoir pressure by lifting oil to the surface, ensuring a continuous flow of oil from the wellbore.
- Increased Production: These pumps are employed to enhance the production rate of oil wells. By efficiently lifting oil from deeper reservoirs or reservoirs with declining pressure, electric pumps contribute to maintaining or increasing overall production levels.
- Versatility: Electric oil well pumps are versatile and can be used in various well configurations, including vertical and deviated wells. Their adaptability makes them suitable for a wide range of oil extraction scenarios.
- Deep Well Pumping: In situations where the depth of the oil reservoir is substantial, electric pumps are often preferred for their capability to lift oil from significant depths. This is especially important in offshore drilling and in areas with deep underground oil deposits.
- Remote Monitoring and Control: Many electric oil well pumps are equipped with monitoring and control systems that allow operators to remotely monitor well conditions and adjust pump parameters. This contributes to operational efficiency and reduces the need for frequent manual intervention.
- Energy Efficiency: Electric pumps can be more energy-efficient compared to some other artificial lift methods, contributing to cost savings over the long term.
- Reduced Environmental Impact: Electric pumps may have a lower environmental impact compared to certain alternative pumping methods, such as gas lift or beam pumps powered by gas engines.
- Consistent Flow Rates: Electric pumps provide a consistent and controllable flow rate, allowing operators to optimize production based on reservoir characteristics and market demands.
- Ease of Maintenance: Compared to some other artificial lift systems, electric pumps can be relatively easier to maintain, leading to reduced downtime and operational disruptions.
- Compatibility with Automation: Electric oil well pumps can be integrated into automated control systems, facilitating better coordination with other components of the oil production process and enabling more efficient and streamlined operations.
size
DC12V
Safety measures and precautions
- Read the Manual:
- Familiarize yourself with the manufacturer’s manual and guidelines for the Electric Oil Well Pump BMD001. Follow the recommended procedures for installation, operation, and maintenance.
- Qualified Personnel:
- Ensure that only qualified and trained personnel operate, install, or maintain the pump. Proper training and experience are crucial for handling electrical equipment.
- Personal Protective Equipment (PPE):
- Wear appropriate PPE, including safety gloves, eye protection, and flame-resistant clothing to protect against potential hazards.
- Isolation and Lockout/Tag out:
- Before performing any maintenance or repair work, isolate the power supply and implement lockout/tag out procedures. This prevents accidental energization of the equipment.
- Grounding:
- Ensure that the pump is properly grounded to prevent electrical shock. Follow the manufacturer’s recommendations for grounding procedures.
- Inspection and Maintenance:
- Regularly inspect the pump for any signs of wear, damage, or malfunction. Perform preventive maintenance as per the manufacturer’s recommendations to ensure optimal performance.
- Hazardous Area Classification:
- Consider the location where the pump is installed. If it is in a potentially hazardous area, ensure that it complies with the appropriate classification standards and regulations.
- Electrical Wiring:
- Inspect electrical wiring for any damage, wear, or loose connections. Replace damaged wiring promptly and make sure all connections are secure.
- Overload Protection:
- Ensure that the pump has adequate overload protection to prevent overheating and damage. Follow the manufacturer’s guidelines for setting up and testing overload protection devices.
- Emergency Shutdown Procedures:
- Establish clear emergency shutdown procedures and make sure all personnel are familiar with them. This helps to quickly and safely shut down the pump in case of emergencies.
- Training:
- Provide comprehensive training to personnel on the proper operation and emergency response procedures related to the Electric Oil Well Pump BMD001.
- Warning Signs and Labels:
- Clearly label the pump with warning signs and labels indicating potential hazards and safety precautions. Ensure that these labels are easily visible.
- Emergency Response Plan:
- Develop and communicate an emergency response plan that includes procedures for dealing with electrical emergencies, fires, and other potential incidents.
Based on 0 reviews
Be the first to review “Electric Oil Well Pump BMD002”
Related products
-
ELECTRONICS & ELECTRICAL
Electric Router
An electric router with a power rating of 1500W typically refers to a woodworking tool designed for cutting, shaping, and hollowing out various materials, most commonly wood. The “1500W” indicates the tool’s power consumption, with 1500 watts being the electrical power it draws. Electric routers are equipped with a motor that drives a spinning cutting bit, allowing for precise and controlled material removal. These tools are commonly used by woodworkers, carpenters, and craftsmen for tasks such as edge profiling, dado cutting, and intricate joinery. The 1500W rating suggests a relatively powerful router suitable for a wide range of applications in woodworking.
SKU: AHS15484 -
ELECTRONICS & ELECTRICAL
Electric Brush Cutter (6 pieces)
An electric brush cutter is a powered gardening tool designed for cutting and trimming dense vegetation, weeds, and overgrown areas. It is equipped with a motor that is powered by electricity, usually sourced from a power outlet or a rechargeable battery. The tool features a rotating cutting blade or a nylon string, commonly referred to as a trimmer line, that efficiently cuts through thick vegetation. Electric brush cutters are known for their ease of use, low noise levels compared to gas-powered alternatives, and their environmentally friendly operation. They are suitable for maintaining lawns, clearing brush, and tidying up areas where traditional lawnmowers may struggle to reach.
- Rated Voltage: 220-240V~50-60Hz
- Input Power :250W
- No-load Speed: 13000r/min
- Max Cutting Length: 200mm
- Nylonline: φ1.2mm X 6m
SKU: AHS17226 -
ELECTRONICS & ELECTRICAL
Digital Multi-Purpose Clamp Meters
A digital multi-purpose clamp meter is a versatile electronic measuring instrument designed to measure electrical current by clamping around a conductor, typically without the need to disconnect the circuit. It combines the functionalities of a digital multi meter with the convenience of a clamp to accurately measure AC and DC currents, voltage, resistance, capacitance, frequency, and other electrical parameters in various applications. The clamp feature allows for non-invasive current measurements, making it suitable for both professionals and hobbyists in fields such as electrical maintenance, troubleshooting, and testing.
1. Low Battery Indication
2. Overload Protection
3. Data Retention
4. Packed By Color BoxSKU: AHS27345 -
ELECTRONICS & ELECTRICAL
Crimping Pliers for Coaxial Cable (12 pcs)
Crimping pliers for coaxial cable are specialized hand tools designed for terminating or connecting coaxial cables by securely attaching connectors to the cable ends. The term “crimping” refers to the process of deforming a metal sleeve or collar around the cable and connector, creating a reliable electrical and mechanical connection. These pliers typically have a jaw or die set that is matched to the specific type and size of coaxial connectors being used. The user places the connector onto the stripped end of the coaxial cable, positions it within the crimping die, and then squeezes the handles of the pliers to compress the metal sleeve, forming a tight and durable connection. This process ensures proper electrical conductivity and prevents signal leakage or interference in coaxial cable installations.
1. Material: steel & PVC handle.
2. Waterproof Connectors
3. For assembling TV connection
4. Packed by by blister card
SKU: AHS83131
There are no reviews yet.