-8%
2 pcs Battery Clamps Set amaris hardware

2 pcs Battery Clamps Set (12pcs)

Whatsapp Order

Add to wishlist
Compare

A 2 pcs Battery Clamps Set typically refers to a package or kit containing two battery clamps. Battery clamps are electrical connectors designed to attach to a vehicle’s battery terminals, facilitating the connection of external devices such as chargers, jump starters, or other electrical components. These clamps usually have positive (+) and negative (-) markings to ensure proper polarity when connecting to the battery. The set may include two clamps of different colors or markings to distinguish between the positive and negative terminals, helping users make secure and correct connections.

Material: aluminum-magnesium alloy, copper plated
Diameter of positive electrode: 17.5mm
Diameter of negative electrode: 16.2mm
Package: blister card

KSh 5,540.00 KSh 6,040.00

Compare

2 pcs Battery Clamps Set uses 

  1. Jump Starting Vehicles:
    • One of the primary uses of battery clamp sets is for jump-starting vehicles with a dead or weak battery. The positive and negative clamps are attached to the corresponding terminals on the donor vehicle’s battery and the recipient vehicle’s battery, providing the necessary electrical connection to jump-start the engine.
  2. Charging Batteries:
    • Battery clamp sets are often used to connect battery chargers to vehicle batteries. This is especially handy for maintaining or charging batteries during periods of inactivity or when a vehicle is not in use.
  3. Powering Electronic Devices:
    • The clamps can be used to power or charge various electronic devices such as camping equipment, portable appliances, or emergency lighting systems. By connecting the clamps to a suitable power source, users can tap into the energy stored in a vehicle’s battery.
  4. Emergency Power Source:
    • In emergency situations, a 2 PCS Battery Clamps Set can serve as a makeshift power source, providing power for small appliances, lights, or communication devices during power outages or in remote locations.
  5. Testing and Diagnostics:
    • Battery clamps are also used for testing and diagnosing electrical systems in vehicles. They allow technicians to connect testing equipment to the battery for voltage measurements and other diagnostic procedures.
  6. Portable Power Banks:
    • Some battery clamp sets are part of portable power bank systems. These systems integrate a battery pack with the clamps, allowing users to charge mobile devices, run small appliances, or provide emergency power in remote locations.
  7. Off-Road and Outdoor Activities:
    • Battery clamps are valuable tools for off-road enthusiasts and outdoor adventurers. They can power winches, air compressors, or other equipment needed during off-road excursions or camping trips.
SKU: AHS75144 Category:

Safety measures and precautions

  1. Wear Protective Gear:
    • Use safety gloves and eye protection to protect yourself from accidental contact with corrosive substances and to prevent injury in case of sparks or electrical faults.
  2. Inspect the Clamps and Cables:
    • Before use, inspect the battery clamps and cables for any signs of damage, wear, or corrosion. Damaged components should be repaired or replaced to ensure a secure and reliable connection.
  3. Identify Polarity:
    • Ensure that you correctly identify the positive and negative terminals on both the vehicle’s battery and the device you are connecting. Connecting the clamps with the wrong polarity can lead to damage to the electrical system and pose a safety risk.
  4. Turn Off Ignition and Electronics:
    • Before connecting or disconnecting the battery clamps, turn off the ignition and any electronic devices in the vehicle. This minimizes the risk of sparks or electrical surges.
  5. Keep Clamps Securely Attached:
    • Make sure the clamps are securely attached to the battery terminals. Loose connections can lead to sparks, overheating, and potential damage.
  6. Avoid Short Circuits:
    • Be cautious not to allow the clamps to touch each other or any metal surfaces other than the intended battery terminals. Short circuits can cause sparks and damage the electrical system.
  7. Start with the Vehicle with a Good Battery:
    • When jump-starting a vehicle, connect the clamps to the vehicle with the good battery first. Then connect the clamps to the dead battery. This minimizes the risk of sparking near the discharged battery.
  8. Follow Manufacturer’s Instructions:
    • Adhere to the instructions provided by the manufacturer of the battery clamps set and any connected devices. Different products may have specific guidelines for use.
  9. Avoid Overloading:
    • Do not use the battery clamps set to power devices that exceed its recommended capacity. Overloading can lead to overheating and potential damage.
  10. Monitor Charging Process:
    • If using the battery clamps set to charge a vehicle battery, monitor the charging process and disconnect the clamps once the battery is charged to prevent overcharging.
  11. Disconnect in Reverse Order:
    • When removing the clamps, disconnect them in the reverse order of connection. Start by removing the negative clamp from the vehicle, then the negative clamp from the booster vehicle, followed by the positive clamps.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “2 pcs Battery Clamps Set (12pcs)”

There are no reviews yet.

Related products