Bosch GSH 500 Demolition Hammer Amaris Hardware Solutions

Bosch GSH 500 Demolition Hammer

WhatsApp Order

The Bosch GSH 500 Demolition Hammer is a powerful demolition tool available in two tool holder variants: SDS max (0.611.338.7L0) and 17mm Hex (0.611.338.6F0) . It features Vario-Lock for 12-position chisel bit changes, high impact energy of 6.8-8.3 J, impact rate of 2,900 bpm, and weight of 5.5-6.2kg . The dust cap and grease sealing ring ensure extended durability. Includes auxiliary handle, carrying case, and pointed chisel. Suitable for construction, demolition, and renovation professionals.

Compare

Add to wishlist

Categories: POWER TOOLS, Rotary Tools Tags: 06113386F0, 06113387L0, Bosch GSH 500, Bosch Professional, Breaker, chipping hammer, concrete breaker, construction tool, demolition hammer, demolition tool, Hex Hammer, masonry tool, SDS Max Hammer

Description

Table of Contents

Bosch GSH 500 Demolition Hammer

PRIMARY USES

1. Heavy-Duty Demolition and Chiselling for Construction and Renovation

Primary Use: A powerful demolition hammer (1,025-1,150W, 6.8-8.3 J impact energy) used for heavy chiselling, breaking, and demolition work in concrete, stone, rock, and brickwork . Essential for construction workers, demolition crews, and renovation professionals requiring high-impact material removal.

How it helps: For construction professionals and demolition crews, the demolition hammer delivers high chipping output with its powerful motor and superior impact rate of up to 2,900 bpm . The Vario-Lock design allows for 12-position chisel bit changes with one hand, enabling comfortable working from any position . The dust cap and grease sealing ring prevent leakage and improve dust protection, resulting in a long service life .

2. Breaking and Chiselling Applications

Primary Use: Perfect for breaking, chiselling, and wall slotting in concrete, stone, and brickwork .

How it helps: The large hammer pipe and improved impact system design make the tool more effective during chiselling work . The low vibration design, achieved through a well-designed damping ring system, reduces operator fatigue during extended use .

SECONDARY USES

1. Wall Slotting: Creates channels in masonry for electrical and plumbing installations .

2. Floor and Wall Demolition: Breaks up concrete floors and removes tile and plaster.

3. Foundation Work: Demolishes small foundations and concrete structures.

4. Pipe and Cable Chasing: Creates recesses for pipes and cables in masonry walls.

About brand

**Bosch** is a leading German brand founded in **1886**, renowned for its high-quality, innovative, and reliable engineering solutions. In the hardware industry, Bosch is best known for its durable power tools, measuring equipment, and accessories, trusted by professionals and DIY users worldwide. With a strong focus on performance, precision, and innovation, Bosch continues to set the standard for quality in construction, manufacturing, and home improvement.

KEY PRODUCT FEATURES

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Demolition hammer; not a medical device.
Designation: Bosch GSH 500 Professional
Order Numbers: 0.611.338.7L0 (SDS max, with case and chisel) , 0.611.338.6F0 (Hex) , 0.611.338.7G0 (SDS max variant)
Rated Input Power: 1,025 – 1,150W
Impact Energy: 6.8 – 8.3 J
Impact Rate: 2,750 – 2,900 bpm
Weight: 5.5 – 6.2 kg
Tool Holder: SDS max or 17mm Hex
Length: 450 – 480mm
Country of Origin: India

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Heavy-duty chiselling and demolition via high-impact mechanism.
Tool Holder: SDS max or 17mm Hex shank
Vario-Lock: One-hand design for 12-position chisel bit changes
Lock-on Button: For continuous daily work
Vibration Control: Damping ring system for low vibration operation
Dust Protection: Improved dust cap and grease sealing ring for extended durability

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Insert the SDS max or Hex chisel into the tool holder until it locks. Ensure the bit is securely seated.
Usage Instructions: Select the appropriate chisel position using the Vario-Lock. Press the lock-on button for continuous operation. Guide the tool against the workpiece and allow the impact mechanism to do the work.
Ergonomics: Straight handle design for well-balanced handling
Included Accessories: Auxiliary handle, carrying case, 1 x pointed chisel (SDS max 280mm or Hex 280mm)
Storage Conditions: Store in a dry, secure place.
Cleaning: Clean housing with soft, dry cloth. Check dust cap regularly.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: Power tool; high risk of injury from impact mechanism, flying debris, and vibration. Eye protection, hearing protection, and heavy-duty gloves required.
Dust Hazard: Demolition generates hazardous silica dust. Use appropriate respiratory protection (at least P2 or N95 mask) and dust extraction where possible.
Vibration Hazard: Low vibration design but prolonged use requires regular breaks.
Electrical Safety: Check power cord for damage before use. Do not operate in wet conditions.
Regulatory: Complies with applicable safety standards.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a dry, secure place.
Inspection: Regularly inspect chisels for damage or wear. Check power cord for damage.
Usage: Always unplug before changing chisels or performing maintenance. Allow the tool to cool before storing.

SAFETY HANDLING PRECAUTIONS

1. SAFETY PRECAUTIONS

Personal Protective Equipment (PPE): Always wear safety goggles, hearing protection, and heavy-duty gloves. Use respiratory protection (at least P2 or N95 mask) when working with concrete and masonry.

Electrical Safety: Check power cord and extension cord for damage before use. Do not operate in wet conditions or near water. Use RCD where required.

Vibration Hazard: Use the damping ring system for reduced vibration. Take regular breaks to prevent hand-arm vibration syndrome.

Dust Hazard: Demolition generates silica dust. Use appropriate respiratory protection and dust extraction where possible. Clear work area and use proper dust control measures.

Kickback Hazard: Maintain a firm grip and proper stance. Be prepared for sudden reactions if the chisel binds in the material.

Maintenance: Unplug tool before changing chisels or performing maintenance. Allow the tool to cool before storing.

Training requirement: Operators must be trained on correct usage and safety procedures. Supervisors should ensure all safety protocols are followed.

2. FIRST AID MEASURES

Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean water for at least 15 minutes, holding eyelids open. Seek medical attention.

Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Skin Contact (dust): Wash skin with soap and water. If irritation develops, seek medical attention.

Inhalation of Dust: Move a person to fresh air. If symptoms persist (coughing, difficulty breathing), seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: The tool is not flammable, but plastic casing may burn if exposed to fire. Dust accumulation at the workplace can ignite.

Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools.

Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers; water may be used for general fires but not for electrical fires where live equipment is involved.

Bosch GSH 500 Demolition Hammer

Bosch GSH 500 Demolition Hammer

PRIMARY USES

1. Heavy-Duty Demolition and Chiselling for Construction and Renovation

2. Breaking and Chiselling Applications

Primary Use: Perfect for breaking, chiselling, and wall slotting in concrete, stone, and brickwork .

How it helps: The large hammer pipe and improved impact system design make the tool more effective during chiselling work . The low vibration design, achieved through a well-designed damping ring system, reduces operator fatigue during extended use .

SECONDARY USES

1. Wall Slotting: Creates channels in masonry for electrical and plumbing installations .

2. Floor and Wall Demolition: Breaks up concrete floors and removes tile and plaster.

3. Foundation Work: Demolishes small foundations and concrete structures.

4. Pipe and Cable Chasing: Creates recesses for pipes and cables in masonry walls.

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Demolition hammer; not a medical device.

Designation: Bosch GSH 500 Professional

Order Numbers: 0.611.338.7L0 (SDS max, with case and chisel) , 0.611.338.6F0 (Hex) , 0.611.338.7G0 (SDS max variant)

Rated Input Power: 1,025 – 1,150W

Impact Energy: 6.8 – 8.3 J

Impact Rate: 2,750 – 2,900 bpm

Weight: 5.5 – 6.2 kg

Tool Holder: SDS max or 17mm Hex

Length: 450 – 480mm

Country of Origin: India

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Heavy-duty chiselling and demolition via high-impact mechanism.

Tool Holder: SDS max or 17mm Hex shank

Vario-Lock: One-hand design for 12-position chisel bit changes

Lock-on Button: For continuous daily work

Vibration Control: Damping ring system for low vibration operation

Dust Protection: Improved dust cap and grease sealing ring for extended durability

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Insert the SDS max or Hex chisel into the tool holder until it locks. Ensure the bit is securely seated.

Usage Instructions: Select the appropriate chisel position using the Vario-Lock. Press the lock-on button for continuous operation. Guide the tool against the workpiece and allow the impact mechanism to do the work.

Ergonomics: Straight handle design for well-balanced handling

Included Accessories: Auxiliary handle, carrying case, 1 x pointed chisel (SDS max 280mm or Hex 280mm)

Storage Conditions: Store in a dry, secure place.

Cleaning: Clean housing with soft, dry cloth. Check dust cap regularly.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: Power tool; high risk of injury from impact mechanism, flying debris, and vibration. Eye protection, hearing protection, and heavy-duty gloves required.

Dust Hazard: Demolition generates hazardous silica dust. Use appropriate respiratory protection (at least P2 or N95 mask) and dust extraction where possible.

Vibration Hazard: Low vibration design but prolonged use requires regular breaks.

Electrical Safety: Check power cord for damage before use. Do not operate in wet conditions.

Regulatory: Complies with applicable safety standards.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a dry, secure place.

Inspection: Regularly inspect chisels for damage or wear. Check power cord for damage.

Usage: Always unplug before changing chisels or performing maintenance. Allow the tool to cool before storing.

1. SAFETY PRECAUTIONS

Personal Protective Equipment (PPE): Always wear safety goggles, hearing protection, and heavy-duty gloves. Use respiratory protection (at least P2 or N95 mask) when working with concrete and masonry.

Electrical Safety: Check power cord and extension cord for damage before use. Do not operate in wet conditions or near water. Use RCD where required.

Vibration Hazard: Use the damping ring system for reduced vibration. Take regular breaks to prevent hand-arm vibration syndrome.

Dust Hazard: Demolition generates silica dust. Use appropriate respiratory protection and dust extraction where possible. Clear work area and use proper dust control measures.

Kickback Hazard: Maintain a firm grip and proper stance. Be prepared for sudden reactions if the chisel binds in the material.

Maintenance: Unplug tool before changing chisels or performing maintenance. Allow the tool to cool before storing.

Training requirement: Operators must be trained on correct usage and safety procedures. Supervisors should ensure all safety protocols are followed.

2. FIRST AID MEASURES

Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean water for at least 15 minutes, holding eyelids open. Seek medical attention.

Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Skin Contact (dust): Wash skin with soap and water. If irritation develops, seek medical attention.

Inhalation of Dust: Move a person to fresh air. If symptoms persist (coughing, difficulty breathing), seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: The tool is not flammable, but plastic casing may burn if exposed to fire. Dust accumulation at the workplace can ignite.

Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools.

Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers; water may be used for general fires but not for electrical fires where live equipment is involved.

Related products

BRANDS

FOLLOW US