Acrylic Sealants
Construction Adhesives
Double-Sided Tape
Duct Tape
Electrical Tape
Epoxy & Resins
Silicone Sealants
Masking Tape
Automotive Wrenches & Socket Sets
Battery Chargers & Jump Starters
Car Jacks & Stands
Car Wash & Detailing Products
Diagnostic Tools
Tire Inflators
Vehicle Lighting
Oil & Lubricants
Adhesives & Sealants
Bricks & Blocks
Cement & Concrete
Drywall & Plaster
Flooring (Tiles, Wood, Laminate)
Lumber & Plywood
Paints, Primers & Coatings
Insulation Materials
Roofing Materials
Circuit Breakers
Electrical Cables & Wires
Switches & Sockets
Fuses & Relays
Connectors & Terminals
Electrical Boxes & Panels
Conduit & Fittings
Lighting Fixtures & Bulbs
Extension Cords & Power Strips
Anchors
Bolts
Clips & Clamps
Screws
Nuts
Washers
Rivets
Nails
Threaded Rods
Hammers
Measuring Tools (Tapes, Levels, Calipers)
Screwdrivers
Pliers & Cutters
Saws & Blades
Chisels & Punches
Allen Keys & Hex Keys
Ratchets & Socket Sets
Wrenches & Spanners
Power Tool Accessories (Blades, Bits, Discs)
Rotary Tools
Saws (Circular, Jigsaw, Reciprocating)
Drills & Drivers
Grinders & Sanders
Heat Guns
Nail Guns
Impact Wrenches
Batteries & Chargers
Pipes & Fittings (PVC, Copper, PEX)
Plumbing Tools
Pumps & Motors
Sealants & Adhesives for Plumbing
Valves & Taps
Water Heaters
Drainage Systems
Faucets & Fixtures
Hoses & Tubing
Hinges & Latches
Hooks & Brackets
Window Hardware
Chains & Cables
Casters & Wheels
Shelving & Storage Systems
Door Handles & Locks
Drawer Slides & Cabinet Hardware
Personal Protective Equipment (PPE)
Respirators & Masks
Safety Glasses
Safes
Security Cameras
Gloves
Helmets
Ear Protection
Fire Safety Equipment
Locks & Padlocks
Motion Sensors & Alarms
Garden Fencing
Garden Furniture Hardware
Lawn Mowers
Trimmers & Edgers
Shovels & Spades
Rakes & Hoes
Pruning Shears & Loppers
Watering Systems (Hoses, Sprinklers, Nozzles)
Interior Paints
Paint Brushes & Rollers
Paint Strippers & Thinners
Paint Trays & Accessories
Exterior Paints
Spray Paints
Primers & Undercoats
Varnishes & Stains
Gaskets & Seals
Hydraulic Fittings
Industrial Fasteners
Industrial Hoses
Lubricants & Greases
Metal Sheets & Bars
Bearings & Bushings
Belts & Pulleys
HVAC Filters
Insulation for HVAC
Air Conditioners
Refrigerants
Ventilation Ducts & Fittings
Thermostats & Controllers
Fans & Blowers
Pegboards & Hooks
Shelving Units
Storage Bins & Containers
Toolboxes & Tool Chests
Workbenches
Drawer Organizers
Labeling Supplies
Welding Accessories (Clamps, Brushes)
Welding Electrodes & Rods
Welding Helmets & Gloves
Welding Machines
Soldering Irons & Stations
Flux & Solder Wire
Generator Accessories
Inverters
Portable Generators
Power Inverters
Transfer Switches
Diesel & Gasoline Generators
Transport Equipment: Carts, Dollies, and Hand Trucks
Storage Solutions: Pallets, Racks, and Containers
Lifting Equipment: Hoists, Cranes, and Jacks
Conveyors & Accessories: Belts & Rollers
Office Chairs
Bosch GWS 2200 Professional Angle Grinder
The Bosch GWS 2200 Professional Angle Grinder features a powerful 2200W motor with 6,500 rpm no-load speed. Available in 180mm and 230mm disc diameter variants. Features M14 spindle thread, barrel handle design, PROTection Switch or lockable switch depending on variant, and weighs 5.4kg. The patented motor delivers high material removal rates with low breakdown rates. Suitable for construction workers, metal fabricators, welders, and demolition professionals. Order numbers: 0.601.8C1.120 (230mm), 0.601.8C1.080 (230mm), 0.601.8C1.0P0 (230mm).
Bosch GWS 2200 Professional Angle Grinder
PRIMARY USES
1. Heavy-Duty Cutting and Grinding for Construction and Metal Fabrication
Primary Use: A powerful angle grinder (2200W motor, 180mm and 230mm disc options) used for heavy-duty cutting, grinding, and surface preparation in metal, stone, and concrete. Essential for construction workers, metal fabricators, welders, and demolition professionals requiring high material removal rates for demanding applications.
How it helps: For construction and metalworking professionals, the grinder delivers best-in-class performance with its patented motor providing high material removal rates. The barrel handle design offers excellent control and comfort during extended use, reducing user fatigue. The 2200W motor with 6,500 rpm no-load speed ensures fast work progress on tough materials. The M14 spindle thread accepts a wide range of standard accessories including cutting discs, grinding wheels, flap discs, and wire brushes.
2. Heavy Material Removal and Surface Preparation
Primary Use: Removes heavy welds, scales, and rust from metal surfaces; grinds concrete and stone surfaces.
How it helps: The powerful motor and robust components ensure low breakdown rates and long service life even under continuous heavy loads. The lower heating of the overall system extends tool lifetime, while improved motor contact delivers longer carbon brush lifetime.
SECONDARY USES
1. Metal Cutting: Cuts through steel rebar, pipes, and structural steel with appropriate cutting discs.
2. Stone and Concrete Cutting: Cuts tiles, bricks, and concrete with diamond cutting wheels.
3. Surface Finishing: Prepares surfaces for welding or painting by removing rust and old coatings.
4. Polishing: With appropriate polishing accessories, restores shine to metal surfaces.
1. BASIC IDENTIFICATION ATTRIBUTES
-
Device Type: Angle grinder; not a medical device.
-
Designation: Bosch GWS 2200 Professional
-
Order Numbers: 0.601.8C1.120 (230mm) , 0.601.8C1.080 (230mm) , 0.601.8C1.0P0 (230mm)
-
Rated Input Power: 2200W
-
No-Load Speed: 6,500 rpm
-
Disc Diameter: 180mm and 230mm variants
-
Grinding Spindle Thread: M14
-
Weight: 5.4kg
-
Voltage: 220-240V AC, 50Hz
-
Main Handle: Barrel design
2. TECHNICAL & PERFORMANCE PROPERTIES
-
Primary Action: Rotational cutting, grinding, and polishing via interchangeable discs.
-
Motor Type: Patented Bosch motor for high material removal rate
-
Cooling: Lower heating for extended tool lifetime
-
Vibration Emission Value ah: 2.5 m/s²
-
Uncertainty K: 1.5 m/s²
-
Sound Pressure Level: 104 dB(A)
-
Sound Power Level: 93 dB(A)
-
Cable Length: 2.5m
-
Disc Compatibility: Cutting discs, grinding wheels, flap discs, wire brush wheels, diamond cutting wheels
3. PHYSICAL & OPERATIONAL PROPERTIES
-
Preparation: Ensure the disc guard is correctly fitted. Select the correct disc for the task. Check the disc for damage.
-
Usage Instructions: Allow tool to reach full speed before contacting the workpiece. Apply moderate pressure. Use the barrel handle for comfortable two-handed operation.
-
Switch Type: Protection Switch or Lockable Switch depending on variant
-
Storage Conditions: Store in a dry, secure place.
-
Cleaning: Clean housing with soft, dry cloth. Keep air vents clear.
4. SAFETY & COMPLIANCE ATTRIBUTES
-
Safety Classification: High-speed rotating power tool; risk of injury from disc shattering, flying debris, and sparks. Eye protection, face shield, hearing protection, and heavy-duty gloves required.
-
Disc Safety: Ensure disc is rated for 6,500 rpm tool speed. M14 spindle thread.
-
Included Accessories: Protective guard, backing flange, locking nut, auxiliary handle, two-hole spanner.
-
Country of Origin: Not specified
-
Regulatory: Complies with applicable safety standards.
5. STORAGE & HANDLING ATTRIBUTES
-
Storage: Store in a dry, secure place.
-
Inspection: Regularly inspect tools, discs, and accessories for damage. Check carbon brushes and replace if worn.
-
Usage: Always unplug before changing discs or performing maintenance.
1. SAFETY PRECAUTIONS
Personal Protective Equipment (PPE): Always wear safety goggles or face shield, hearing protection, heavy-duty gloves, and appropriate respiratory protection. For heavy-duty use, wear a full-face shield and leather apron.
Kickback Hazard: Hold tool firmly with both hands. Do not stand directly behind the disc. Use the correct disc for the task. The 2200W motor generates high torque and is prone to kickback – maintain a secure stance.
Disc Safety: Inspect discs for damage before use. Use discs rated for grinder speed (6,500 rpm). Do not use damaged or cracked discs. Ensure the disc guard is correctly positioned between operator and disc.
Electrical Safety: Use Residual Current Device (RCD). Do not operate in wet conditions or near water. Check power cord and extension cord for damage before use.
Fire Hazard: Sparks can ignite flammable materials. Clear work area. Do not use near flammable substances. Have a fire extinguisher readily available.
Dust Hazard: Some materials generate hazardous dust (silica from masonry, lead from old paint, chromium from stainless steel). Use local exhaust ventilation and appropriate respiratory protection (at least P2 or N95 mask).
Maintenance: Unplug tool before changing accessories or performing maintenance. Allow the tool to cool before storing.
Training requirement: Operators must be trained on correct usage, disc selection, and safety procedures. Supervisors should ensure all safety protocols are followed.
2. FIRST AID MEASURES
Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean, lukewarm water for at least 15 minutes, holding eyelids open. Seek medical attention.
Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.
Skin Contact (dust): Wash skin with soap and water. If irritation develops, seek medical attention.
Inhalation of Dust: Move a person to fresh air. If symptoms persist (coughing, difficulty breathing), seek medical attention.
Burn Injury (hot metal or disc): Immediately cool affected area with cool running water for at least 10 minutes. Cover with sterile dressing. Seek medical attention.
3. FIRE FIGHTING MEASURES
Flammability: Grinder is not flammable, but sparks generated during use can ignite flammable materials. Plastic casing may burn if exposed to fire.
Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools.
Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers; water may be used for general fires but not for electrical fires where live equipment is involved.
Related products
Cement And Paint Mixer
A cement and paint mixer is a mechanical device designed to efficiently and homogeneously blend cement or paint constituents to achieve a uniform and consistent mixture. Typically utilized in construction and painting applications, these mixers come in various designs, including portable or stationary models. They feature rotating blades, paddles, or agitators that facilitate the thorough mixing of dry or liquid materials, ensuring the creation of a well-mixed and homogeneous product suitable for construction or painting purposes.
Cement Blender – SDS Plus
A Cement Blender - SDS Plus mechanism typically refers to a power tool designed for mixing cement, mortar, or other construction materials. The term "SDS-PLUS" refers to a specific chuck and bit system commonly used in rotary hammers and drills. SDS-PLUS chucks allow for quick and secure attachment of drill bits and other accessories.
In the context of a cement blender with SDS-PLUS, it likely means that the tool has a specialized chuck system for easy attachment of mixing paddles or blades used in blending cement or similar materials. The SDS-PLUS system is known for its quick-change capability, enhancing efficiency and convenience when working with different attachments. The blender's design may include features to ensure effective mixing of construction materials, making it suitable for tasks like preparing mortar or concrete on construction sites.
Finishing Sander
The finishing sander is a high-performance power tool designed to deliver smooth, even surfaces on wood, metal, or painted materials. Its ergonomic design allows for comfortable handling during extended use, while its powerful motor ensures consistent sanding performance. Perfect for removing minor imperfections, preparing surfaces for paint or varnish, and achieving a professional-quality finish, this tool is ideal for carpenters, woodworkers, DIY enthusiasts, and home improvement projects. The finishing sander is compatible with a variety of sanding pads and accessories, making it versatile for different applications and finishing requirements.
Flat Knotted Wire Wheel
A Flat Knotted Wire Wheel refers to a rotating tool used in various applications, typically in metalworking and surface preparation. It consists of a wheel-shaped assembly with wire bristles that are tightly twisted or "knotted" together. The wire bristles can be made of steel or other durable materials, and they are arranged in a radial pattern around the wheel.
Knotted wire wheels are commonly attached to power tools such as angle grinders or bench grinders. They are employed for tasks like removing rust, paint, scale, or other surface contaminants from metal surfaces, as well as for deburring or blending welds. The tightly twisted configuration of the wire bristles enhances the wheel's durability and effectiveness in tackling tough materials and applications.
These wheels are available in various sizes and designs to suit different tasks, and they are known for their abrasive action, making them valuable tools in metal fabrication, construction, and maintenance work.
Gasoline Auger Machine
A gasoline auger machine is a power tool designed for drilling holes in the ground using a rotating helical screw blade, commonly known as an auger. Unlike electric or manual augers, a gasoline auger machine is powered by a gasoline engine, providing greater mobility and independence from electrical power sources. This type of machine is commonly used in construction, landscaping, and agriculture for tasks such as digging holes for fence posts, planting trees, or installing various types of foundations. The gasoline engine provides the necessary power to turn the auger bit efficiently, making it suitable for heavy-duty and remote applications where access to electricity may be limited.
Gasoline Hedge Trimmer
A gasoline hedge trimmer is a handheld gardening tool powered by a gasoline engine, designed for trimming and shaping hedges, bushes, and shrubs. It consists of a cutting blade or blades, typically reciprocating, attached to a long shaft with a handle or grip for ease of use. The gasoline engine provides the necessary power to drive the blades, offering mobility and independence from electrical outlets, making it suitable for use in outdoor settings where access to electricity may be limited. Gasoline hedge trimmers are valued for their versatility, allowing users to manicure and maintain landscaping with efficiency and precision.
Glass Drill Set Hexagonal Handle
A Glass Drill Set Hexagonal Handle typically refers to a collection of five drill bits specifically designed for drilling holes in glass surfaces. The term "hexagonal handle" indicates that the shank of each drill bit has a hexagonal (six-sided) shape, which can provide a better grip and prevent slipping when used with a compatible drill. These drill bits are specifically crafted for working with glass materials, offering precision and minimizing the risk of cracking or damaging the glass during the drilling process. The set may include different-sized bits to accommodate various hole diameters.
Glass Drill Set Straight Handle
A Glass Drill Set Straight Handle refers to a set of five drill bits specifically designed for drilling into glass surfaces. Each drill bit in the set typically has a straight handle, making it easier to grip and control during the drilling process. These drill bits are crafted with materials and designs that enhance their ability to cut through glass without causing cracks or shattering. The set may include a variety of drill bit sizes to accommodate different drilling needs and applications on glass surfaces.
