Bosch Progressor Hole Saw Amaris Hardware Solutions

Click to enlarge

Bosch Progressor Hole Saw

WhatsApp Order

The Bosch Progressor Hole Saw range features an integrated depth stop for controlled depth cutting and deep cutting capacity for thick materials. Available in sizes: 32mm (1 1/4″) – 2608584624, 35mm (1 3/8″) – 2608584626, 40mm (1 9/16″) – 2608584629, 51mm (2″) – 2608584635, 64mm (2 1/2″) – 2608584642, and 105mm (4 1/8″) – 2608584657. Suitable for electricians, plumbers, carpenters, and construction professionals for cutting holes in wood, plastic, and drywall.

Compare

Add to wishlist

Description

Table of Contents

Bosch Progressor Hole Saw

PRIMARY USES

1. Deep Hole Cutting with Integrated Depth Stop

Primary Use: A range of Progressor hole saws (32mm to 105mm diameter) used for cutting large diameter holes in wood, plastic, and drywall with integrated depth stop for controlled depth cutting. Essential for electrical installation, plumbing, and general construction where precise, deep holes are required.

How it helps: For electricians, plumbers, carpenters, and construction professionals, the Progressor hole saw provides fast, clean cutting with the added benefit of an integrated depth stop that prevents the saw from penetrating too deeply, protecting surfaces behind the workpiece . The deep cutting capacity allows drilling through thick materials in a single pass, making it ideal for cable routing and pipe penetrations through walls and floors . Available sizes from 32mm to 105mm cover the most common diameters for electrical boxes, pipe entries, and ventilation installations.

2. Electrical Installation

Primary Use: Cuts holes for electrical boxes, cable entries, and conduit penetrations in walls, floors, and cabinets.

How it helps: The integrated depth stop allows precise control when cutting through drywall and plasterboard, preventing damage to cables, pipes, or structures behind the wall . The deep cutting capacity ensures clean, accurate holes through various wall thicknesses . The range of diameters accommodates standard electrical box sizes and cable entry requirements.

3. Plumbing Installation

Primary Use: Drills holes for pipe penetrations through walls, floors, and cabinetry.

How it helps: The smooth cutting action delivers clean, burr-free holes in wood and plastic materials commonly encountered in plumbing installations. The integrated depth stop prevents the hole saw from cutting too deep, protecting pipes and surfaces behind the workpiece.

SECONDARY USES

1. Ventilation Installation: Cuts holes for ventilation grilles and duct penetrations.

2. Cabinet Making: Drills holes for cable entries and ventilation in cabinetry.

3. Drywall Work: Cuts clean, accurate holes in plasterboard and drywall.

4. Renovation Work: Installs new electrical and plumbing services in existing structures.

About brand

**Bosch** is a leading German brand founded in **1886**, renowned for its high-quality, innovative, and reliable engineering solutions. In the hardware industry, Bosch is best known for its durable power tools, measuring equipment, and accessories, trusted by professionals and DIY users worldwide. With a strong focus on performance, precision, and innovation, Bosch continues to set the standard for quality in construction, manufacturing, and home improvement.

KEY PRODUCT FEATURES

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Hole saw; not a medical device.
Designation: Bosch Progressor Hole Saw
Application: Wood, plastic, drywall

INDIVIDUAL HOLE SAW SPECIFICATIONS

Order Number	Size	Imperial Equivalent
2608584624	32mm	1 1/4"
2608584626	35mm	1 3/8"
2608584629	40mm	1 9/16"
2608584635	51mm	2"
2608584642	64mm	2 1/2"
2608584645	68mm	2 11/16"
2608584657	105mm	4 1/8"

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Large diameter hole cutting with integrated depth stop.
Depth Stop: Integrated for controlled depth cutting
Cutting Capacity: Deep cutting through thick materials
Material Compatibility: Wood, plastic, drywall
Benefits: Clean holes, controlled depth, one-pass cutting

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Attach the hole saw to a compatible drill chuck or adapter. Ensure the pilot drill bit is securely fitted.
Usage Instructions: Position the pilot drill bit at the centre point of the desired hole. Drill at appropriate speed for the material. The integrated depth stop prevents the hole saw from penetrating beyond the set depth.
Storage Conditions: Store in a dry place to prevent rust.
Cleaning: Clean after use with a soft cloth. Remove debris from teeth.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: Cutting accessory; no laser or electrical hazards.
Material Safety: Durable steel construction
Regulatory: Complies with relevant safety standards.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a dry, secure place to prevent rust and damage.
Inspection: Regularly inspect hole saws for damage or wear. Replace dull or damaged hole saws to ensure clean cutting.
Usage: Use appropriate speed for the material being cut. Do not force the hole saw; allow the teeth to do the cutting. The depth stop prevents over-penetration.

SAFETY HANDLING PRECAUTIONS

1. SAFETY PRECAUTIONS

Operational Safety: Always wear safety glasses when using hole saws. Secure the workpiece firmly before cutting. Do not wear loose clothing or gloves that could become entangled in the tool.

Tool Safety: Ensure the hole saw is securely attached before use. Use appropriate speed for the material. Allow the hole saw to cool between uses.

Maintenance: Clean after use. Remove debris from teeth. Do not use aggressive cleaning agents. Store in a dry place to prevent rust.

Training requirement: No specialised training required. Basic instruction on proper hole saw selection and operation is recommended.

2. FIRST AID MEASURES

Eye Exposure (dust/debris): Rinse immediately with plenty of clean water for at least 15 minutes. Seek medical attention if irritation persists.

Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Bosch Progressor Hole Saw

Bosch Progressor Hole Saw

PRIMARY USES

1. Deep Hole Cutting with Integrated Depth Stop

2. Electrical Installation

Primary Use: Cuts holes for electrical boxes, cable entries, and conduit penetrations in walls, floors, and cabinets.

3. Plumbing Installation

Primary Use: Drills holes for pipe penetrations through walls, floors, and cabinetry.

How it helps: The smooth cutting action delivers clean, burr-free holes in wood and plastic materials commonly encountered in plumbing installations. The integrated depth stop prevents the hole saw from cutting too deep, protecting pipes and surfaces behind the workpiece.

SECONDARY USES

1. Ventilation Installation: Cuts holes for ventilation grilles and duct penetrations.

2. Cabinet Making: Drills holes for cable entries and ventilation in cabinetry.

3. Drywall Work: Cuts clean, accurate holes in plasterboard and drywall.

4. Renovation Work: Installs new electrical and plumbing services in existing structures.

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Hole saw; not a medical device.

Designation: Bosch Progressor Hole Saw

Application: Wood, plastic, drywall

INDIVIDUAL HOLE SAW SPECIFICATIONS

Order Number

Size

Imperial Equivalent

2608584624

32mm

1 1/4"

2608584626

35mm

1 3/8"

2608584629

40mm

1 9/16"

2608584635

51mm

2"

2608584642

64mm

2 1/2"

2608584645

68mm

2 11/16"

2608584657

105mm

4 1/8"

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Large diameter hole cutting with integrated depth stop.

Depth Stop: Integrated for controlled depth cutting

Cutting Capacity: Deep cutting through thick materials

Material Compatibility: Wood, plastic, drywall

Benefits: Clean holes, controlled depth, one-pass cutting

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Attach the hole saw to a compatible drill chuck or adapter. Ensure the pilot drill bit is securely fitted.

Usage Instructions: Position the pilot drill bit at the centre point of the desired hole. Drill at appropriate speed for the material. The integrated depth stop prevents the hole saw from penetrating beyond the set depth.

Storage Conditions: Store in a dry place to prevent rust.

Cleaning: Clean after use with a soft cloth. Remove debris from teeth.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: Cutting accessory; no laser or electrical hazards.

Material Safety: Durable steel construction

Regulatory: Complies with relevant safety standards.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a dry, secure place to prevent rust and damage.

Inspection: Regularly inspect hole saws for damage or wear. Replace dull or damaged hole saws to ensure clean cutting.

Usage: Use appropriate speed for the material being cut. Do not force the hole saw; allow the teeth to do the cutting. The depth stop prevents over-penetration.

1. SAFETY PRECAUTIONS

Operational Safety: Always wear safety glasses when using hole saws. Secure the workpiece firmly before cutting. Do not wear loose clothing or gloves that could become entangled in the tool.

Tool Safety: Ensure the hole saw is securely attached before use. Use appropriate speed for the material. Allow the hole saw to cool between uses.

Maintenance: Clean after use. Remove debris from teeth. Do not use aggressive cleaning agents. Store in a dry place to prevent rust.

Training requirement: No specialised training required. Basic instruction on proper hole saw selection and operation is recommended.

2. FIRST AID MEASURES

Eye Exposure (dust/debris): Rinse immediately with plenty of clean water for at least 15 minutes. Seek medical attention if irritation persists.

Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Inhalation: Move to fresh air. If symptoms persist, seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: The hole saws themselves are not flammable. Packaging may burn if exposed to fire.

Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving packaging.

Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers.

Related products

BRANDS

FOLLOW US