Floor Jack 3T

Safety Precautions

1. Use on Level, Stable Surfaces
   o Always place the jack on a flat, solid surface to prevent tipping or sliding.
   o Avoid using on uneven or sloped ground. 
2. Do Not Work Under Vehicle Without Jack Stands
   o A floor jack is for lifting only—never crawl under a vehicle unless it is properly supported by jack stands.
   o Ensure jack stands are rated for the weight and properly positioned. 
3. Check Load Capacity
   o Do not exceed the 3-ton limit; verify the weight of the vehicle before lifting.
   o Use a higher-rated jack for heavier vehicles like trucks or vans. 
4. Position Jack Correctly
   o Align the saddle with the manufacturer's designated lift point to avoid damage or instability.
   o Refer to the vehicle manual for correct jacking locations. 
5. Inspect Before Use
   o Check for leaks, damage, or worn components before operation.
   o Ensure the hydraulic system functions smoothly without abnormal resistance. 
6. Slow and Controlled Operation
   o Raise and lower the vehicle slowly to maintain control and stability.
   o Avoid sudden release of pressure or fast lowering. 
7. Wear Protective Gear
   o Use gloves and steel-toed boots to protect hands and feet.
   o Wear safety goggles when working under the vehicle to prevent debris exposure. 
8. Hydraulic Fluid Safety
   o Use only manufacturer-recommended hydraulic fluid.
   o Avoid contact with skin and eyes; clean spills immediately. 
9. Training and Manufacturer Guidelines
   o Operators should be trained in proper jacking procedures.
   o Follow the user manual for maintenance, operation, and storage instructions.