Bosch GCM 10 MX Professional Benchtop Mitre Saw Amaris Hardware Solutions

Bosch GCM 10 MX Professional Benchtop Mitre Saw

WhatsApp Order

The Bosch GCM 10 MX Professional Benchtop Mitre Saw is a powerful 1700W tool engineered for precise aluminium and wood cutting. It features a 254mm saw blade and a no-load speed of 4,800 rpm. The saw provides excellent versatility with mitre settings from 47° left to 52° right and a 45° left bevel setting. It offers a 0° cutting capacity of 89x89mm and can handle 45° cuts with capacities of 62x130mm and 86x67mm for mitre and bevel cuts, respectively. The saw weighs 16.08 kg and includes accessories such as a hex key or a multi-material saw blade, depending on the specific kit. It is suitable for carpenters, joiners, and aluminium fabricators. Order numbers: 0.601.B29.0P0, 0.601.B29.0L0, 0.601.B29.0K0.

Compare

Add to wishlist

Categories: POWER TOOLS, Saws (Circular, Jigsaw, Reciprocating) Tags: 1700W Mitre Saw, 254mm Mitre Saw, Aluminium Cutting Saw, Benchtop Saw, Bosch GCM 10 MX, Bosch Professional, Compound Mitre Saw, Mitre Saw, power tool, Professional Mitre Saw, woodworking saw

Description

Table of Contents

Bosch GCM 10 MX Professional Benchtop Mitre Saw

PRIMARY USES

1. Precision Cross-Cutting and Mitre Cutting for Woodworking and Aluminium Fabrication

Primary Use: A powerful 1700W benchtop mitre saw (254mm blade diameter, 4,800 rpm) designed for high-precision cross-cutting and mitre cutting of wood and aluminium. Essential for carpenters, joiners, and aluminium fabricators requiring accurate, efficient cutting in workshop environments.

How it helps: For carpenters, joiners, and aluminium fabricators, the GCM 10 MX delivers high cutting efficiency and cutting precision with its powerful 1700W motor. The saw is engineered for high-performance cutting, especially when frequently cutting aluminium. It offers a wide range of mitre settings (47° L to 52° R) and bevel settings (45° L) for versatile angled cuts. The large cutting capacity at 0° of 89 x 89 mm allows for handling substantial workpieces.

2. Aluminium Cutting

Primary Use: Specifically designed for precise and frequent cutting of aluminium profiles and materials.

How it helps: The high-performance motor and carbide-tipped blade provide the power and cutting quality needed for clean, burr-free cuts in aluminium. This makes the saw a preferred choice for professionals working with aluminium window frames, door frames, and other aluminium structures.

SECONDARY USES

1. Woodworking: Perfect for cross-cutting, mitre cutting, and bevel cutting of softwood and hardwood.

2. Joinery: Produces precise angled cuts for frames, trims, and joinery applications.

3. Picture Framing: Accurate mitre cuts for picture frames and moulding.

4. Construction: Site-based cutting for framing, decking, and other structural applications.

About brand

**Bosch** is a leading German brand founded in **1886**, renowned for its high-quality, innovative, and reliable engineering solutions. In the hardware industry, Bosch is best known for its durable power tools, measuring equipment, and accessories, trusted by professionals and DIY users worldwide. With a strong focus on performance, precision, and innovation, Bosch continues to set the standard for quality in construction, manufacturing, and home improvement.

KEY PRODUCT FEATURES

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Benchtop mitre saw; not a medical device.
Designation: Bosch GCM 10 MX Professional
Order Numbers: 0.601.B29.0P0 , 0.601.B29.0L0 , 0.601.B29.0K0
Rated Input Power: 1,700W
No-Load Speed: 4,800 rpm
Saw Blade Diameter: 254mm
Saw Blade Bore Diameter: 25.4mm (or 30mm in some variants)
Weight: 16.08 kg
Country of Origin: India

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Rotational sawing with mitre and bevel capability.
Motor Type: Brushed universal motor with 1700W input power.
Mitre Setting: 47° Left / 52° Right
Bevel Setting: 45° Left
Cutting Capacity, 0°: 89 x 89 mm
Cutting Capacity, 45° Mitre: 62 x 130 mm
Cutting Capacity, 45° Bevel: 86 x 67 mm
Tool Dimensions (W x L x H): 535 x 475 x 330 mm

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Mount the saw on a stable workbench. Secure the workpiece with the clamp . Select the appropriate blade for the material.
Usage Instructions: Adjust the mitre and bevel angles using the clearly marked scales. Secure the settings before cutting. Lower the blade smoothly for clean, precise cuts.
Accessories: Kit contents vary but often include a hex key , a multi-material saw blade, a dust bag , a clamp , and a plate support .
Dust Extraction: Equipped with a dust bag and a dust extraction port for connecting to a vacuum .
Storage Conditions: Store in a dry, secure place. Use the blade guard for safe transport.
Cleaning: Clean the housing and blade with a soft, dry cloth.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: Power tool; risk of injury from rotating blade, kickback, and flying debris. Eye protection and hearing protection required.
Safety Features: Transparent blade guard for safety and visibility . A motor brake for rapid blade stoppage .
Regulatory: Complies with applicable safety standards.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a dry, secure place.
Inspection: Regularly inspect the blade for damage. Check the power cord for wear.
Usage: Always unplug before changing blades or performing maintenance. Secure the workpiece firmly before cutting.

SAFETY HANDLING PRECAUTIONS

1. SAFETY PRECAUTIONS

Personal Protective Equipment (PPE): Always wear safety goggles and hearing protection. Use respiratory protection when cutting materials that generate dust. Wear protective gloves when handling blades.

Electrical Safety: Check power cord and extension cord for damage before use. Do not operate in wet conditions.

Kickback Hazard: Maintain a firm grip and proper stance. Ensure the workpiece is securely clamped. Do not force the saw; allow it to cut at its own pace.

Blade Safety: Ensure the blade is correctly sized and mounted. Never use damaged blades.

Dust Hazard: Wood and aluminium dust can be hazardous. Use appropriate respiratory protection and dust extraction where possible.

Maintenance: Unplug the tool before changing blades or performing maintenance. Allow the tool to cool before storing.

Training requirement: Operators must be trained on correct usage, blade selection, and safety procedures. Supervisors should ensure all safety protocols are followed.

2. FIRST AID MEASURES

Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean water for at least 15 minutes, holding eyelids open. Seek medical attention.

Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Skin Contact (dust): Wash skin with soap and water. If irritation develops, seek medical attention.

Inhalation of Dust: Move a person to fresh air. If symptoms persist (coughing, difficulty breathing), seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: The tool is not flammable, but plastic casing may burn if exposed to fire. Sparks generated during cutting can ignite flammable materials.

Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools.

Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers; water may be used for general fires but not for electrical fires where live equipment is involved.

Bosch GCM 10 MX Professional Benchtop Mitre Saw

Bosch GCM 10 MX Professional Benchtop Mitre Saw

PRIMARY USES

1. Precision Cross-Cutting and Mitre Cutting for Woodworking and Aluminium Fabrication

Primary Use: A powerful 1700W benchtop mitre saw (254mm blade diameter, 4,800 rpm) designed for high-precision cross-cutting and mitre cutting of wood and aluminium. Essential for carpenters, joiners, and aluminium fabricators requiring accurate, efficient cutting in workshop environments.

2. Aluminium Cutting

Primary Use: Specifically designed for precise and frequent cutting of aluminium profiles and materials.

How it helps: The high-performance motor and carbide-tipped blade provide the power and cutting quality needed for clean, burr-free cuts in aluminium. This makes the saw a preferred choice for professionals working with aluminium window frames, door frames, and other aluminium structures.

SECONDARY USES

1. Woodworking: Perfect for cross-cutting, mitre cutting, and bevel cutting of softwood and hardwood.

2. Joinery: Produces precise angled cuts for frames, trims, and joinery applications.

3. Picture Framing: Accurate mitre cuts for picture frames and moulding.

4. Construction: Site-based cutting for framing, decking, and other structural applications.

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Benchtop mitre saw; not a medical device.

Designation: Bosch GCM 10 MX Professional

Order Numbers: 0.601.B29.0P0 , 0.601.B29.0L0 , 0.601.B29.0K0

Rated Input Power: 1,700W

No-Load Speed: 4,800 rpm

Saw Blade Diameter: 254mm

Saw Blade Bore Diameter: 25.4mm (or 30mm in some variants)

Weight: 16.08 kg

Country of Origin: India

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Rotational sawing with mitre and bevel capability.

Motor Type: Brushed universal motor with 1700W input power.

Mitre Setting: 47° Left / 52° Right

Bevel Setting: 45° Left

Cutting Capacity, 0°: 89 x 89 mm

Cutting Capacity, 45° Mitre: 62 x 130 mm

Cutting Capacity, 45° Bevel: 86 x 67 mm

Tool Dimensions (W x L x H): 535 x 475 x 330 mm

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Mount the saw on a stable workbench. Secure the workpiece with the clamp . Select the appropriate blade for the material.

Usage Instructions: Adjust the mitre and bevel angles using the clearly marked scales. Secure the settings before cutting. Lower the blade smoothly for clean, precise cuts.

Accessories: Kit contents vary but often include a hex key , a multi-material saw blade, a dust bag , a clamp , and a plate support .

Dust Extraction: Equipped with a dust bag and a dust extraction port for connecting to a vacuum .

Storage Conditions: Store in a dry, secure place. Use the blade guard for safe transport.

Cleaning: Clean the housing and blade with a soft, dry cloth.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: Power tool; risk of injury from rotating blade, kickback, and flying debris. Eye protection and hearing protection required.

Safety Features: Transparent blade guard for safety and visibility . A motor brake for rapid blade stoppage .

Regulatory: Complies with applicable safety standards.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a dry, secure place.

Inspection: Regularly inspect the blade for damage. Check the power cord for wear.

Usage: Always unplug before changing blades or performing maintenance. Secure the workpiece firmly before cutting.

1. SAFETY PRECAUTIONS

Personal Protective Equipment (PPE): Always wear safety goggles and hearing protection. Use respiratory protection when cutting materials that generate dust. Wear protective gloves when handling blades.

Electrical Safety: Check power cord and extension cord for damage before use. Do not operate in wet conditions.

Kickback Hazard: Maintain a firm grip and proper stance. Ensure the workpiece is securely clamped. Do not force the saw; allow it to cut at its own pace.

Blade Safety: Ensure the blade is correctly sized and mounted. Never use damaged blades.

Dust Hazard: Wood and aluminium dust can be hazardous. Use appropriate respiratory protection and dust extraction where possible.

Maintenance: Unplug the tool before changing blades or performing maintenance. Allow the tool to cool before storing.

Training requirement: Operators must be trained on correct usage, blade selection, and safety procedures. Supervisors should ensure all safety protocols are followed.

2. FIRST AID MEASURES

Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean water for at least 15 minutes, holding eyelids open. Seek medical attention.

Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Skin Contact (dust): Wash skin with soap and water. If irritation develops, seek medical attention.

Inhalation of Dust: Move a person to fresh air. If symptoms persist (coughing, difficulty breathing), seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: The tool is not flammable, but plastic casing may burn if exposed to fire. Sparks generated during cutting can ignite flammable materials.

Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools.

Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers; water may be used for general fires but not for electrical fires where live equipment is involved.

Related products

BRANDS

FOLLOW US