Bosch GCM 12 GDL Professional Gliding Mitre Saw Amaris Hardware Solutions

Click to enlarge

Bosch GCM 12 GDL Professional Gliding Mitre Saw

WhatsApp Order

The Bosch GCM 12 GDL Professional Gliding Mitre Saw is a 2000W precision tool featuring an innovative, maintenance-free glide arm for long-lasting accuracy . It has a 305mm saw blade, a no-load speed of 4000 rpm, and a mitre setting of 52° Left / 60° Right, and a bevel setting of 47° Left / 47° Right . The saw delivers a 0° cutting capacity of 104 x 341mm and a 45° mitre cut of 104 x 240mm . Weighing 29.4-32.1kg, it includes a double line laser, a high-quality Expert for Wood saw blade, and is compatible with Bosch Click & Clean dust extraction systems . Suitable for carpenters, joiners, and professional woodworkers. Order number: 0.601.B23.600 .

Compare

Add to wishlist

Categories: POWER TOOLS, Saws (Circular, Jigsaw, Reciprocating) Tags: 2000W Mitre Saw, 305mm Mitre Saw, Bosch GCM 12 GDL, Bosch Professional, Compound Mitre Saw, Gliding Mitre Saw, Laser Mitre Saw, precision saw, Professional Mitre Saw, Sliding Mitre Saw, woodworking saw

Description

Table of Contents

Bosch GCM 12 GDL Professional Gliding Mitre Saw

PRIMARY USES

1. Highest Precision Cutting for Demanding Professional Applications

Primary Use: A premium gliding mitre saw (2000W motor, 305mm blade diameter, 4000 rpm) engineered for the most accurate cutting results in the Bosch range. It is the top choice for jobs that demand the highest precision, including cross, mitre, bevel, and groove cuts in wood, timber beams, and wood composites, as well as in board materials and floor panels .

How it helps: For carpenters, joiners, and professional woodworkers, the GCM 12 GDL delivers unprecedented cutting accuracy and smoothness thanks to its innovative, maintenance-free glide arm. The frictionless slide mechanism ensures very easy sawing without loss of power, while the robust, patented hinge design makes the saw compact from front to back . The integrated double line laser and top-quality saw blade ensure highly accurate cuts, with a cutting depth of up to 170 x 140mm for L-profiles .

2. High-Capacity Cutting

Primary Use: The saw’s substantial cutting capacity allows for handling large workpieces with ease.

How it helps: With a 0° cutting capacity of 104 x 341 mm, the saw is capable of cutting through wide boards and large timber beams in a single pass . Its versatility is further enhanced by a 45° mitre cutting capacity of 104 x 240 mm and a 45° bevel cutting capacity of 51 x 341 mm .

SECONDARY USES

1. Flooring Installation: Cuts floor panels and planks with high precision for a perfect fit.

2. Moulding and Trim Work: Accurately cuts mitres and bevels for crown moulding, baseboards, and other architectural details.

3. Furniture Making: Produces precise cuts for furniture frames and components.

4. Aluminium Cutting: (With correct blade) Suitable for cutting aluminium profiles.

About brand

**Bosch** is a leading German brand founded in **1886**, renowned for its high-quality, innovative, and reliable engineering solutions. In the hardware industry, Bosch is best known for its durable power tools, measuring equipment, and accessories, trusted by professionals and DIY users worldwide. With a strong focus on performance, precision, and innovation, Bosch continues to set the standard for quality in construction, manufacturing, and home improvement.

KEY PRODUCT FEATURES

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Gliding mitre saw; not a medical device.
Designation: Bosch GCM 12 GDL Professional
Order Number: 0.601.B23.600
Rated Input Power: 2000W (1800W in some variants)
No-Load Speed: 3,800 – 4,000 rpm
Saw Blade Diameter: 305mm
Saw Blade Bore Diameter: 30mm (25.4mm in some variants)
Weight: 29.4 – 32.1 kg
Tool Dimensions (W x L x H): 670 x 1100 x 740 mm
Mitre Setting: 52° L / 60° R
Bevel Setting: 47° L / 47° R

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Rotational sawing with glide-arm mechanism for mitre, bevel, and cross-cutting.
Glide Arm System: Innovative, maintenance-free, extremely robust for lasting precision .
Motor: Powerful 2000W motor .
Laser: Precision double line laser (Class 1, <1mW) for highly accurate cut alignment .
Cutting Capacity, 0°: 104 x 341 mm .
Cutting Capacity, 45° Mitre: 104 x 240 mm .
Cutting Capacity, 45° Bevel: 51 x 341 mm .
Safety & Convenience Features: Intelligent brake system, soft start .

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Mount on a sturdy workbench or stand . Secure the workpiece with the clamp .
Usage Instructions: Adjust the mitre and bevel angles using the clearly marked scales and secure the settings. Use the double line laser for precise alignment. Lower the blade smoothly for accurate cuts .
Dust Extraction: Equipped with Click & Clean dust extraction system compatibility .
Storage Conditions: Store in a dry, secure place. Use the transport safety lock .
Cleaning: Clean the housing and blade with a soft, dry cloth.
Included Accessories: Insert plate, Expert for Wood saw blade, clamp, hex key, stop plate .

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: Power tool; high risk of injury from rotating blade, kickback, and flying debris. Eye protection and hearing protection required.
Safety Features: Transparent blade guard, intelligent brake system .
Regulatory: Complies with applicable safety standards.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a dry, secure place.
Inspection: Regularly inspect the blade for damage and the power cord for wear.
Usage: Always unplug before changing blades or performing maintenance. Secure the workpiece firmly before cutting.

SAFETY HANDLING PRECAUTIONS

1. SAFETY PRECAUTIONS

Personal Protective Equipment (PPE): Always wear safety goggles and hearing protection. Use respiratory protection when cutting materials that generate dust. Wear protective gloves when handling blades.

Electrical Safety: Check power cord and extension cord for damage before use. Do not operate in wet conditions.

Kickback Hazard: Maintain a firm grip and proper stance. Ensure the workpiece is securely clamped. Do not force the saw; allow it to cut at its own pace.

Blade Safety: Ensure the blade is correctly sized and mounted. Never use damaged blades.

Dust Hazard: Wood dust can be hazardous. Use appropriate respiratory protection and dust extraction where possible.

Maintenance: Unplug the tool before changing blades or performing maintenance. Allow the tool to cool before storing.

Training requirement: Operators must be trained on correct usage, blade selection, and safety procedures. Supervisors should ensure all safety protocols are followed.

2. FIRST AID MEASURES

Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean water for at least 15 minutes, holding eyelids open. Seek medical attention.

Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Skin Contact (dust): Wash skin with soap and water. If irritation develops, seek medical attention.

Inhalation of Dust: Move a person to fresh air. If symptoms persist (coughing, difficulty breathing), seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: The tool is not flammable, but plastic casing may burn if exposed to fire. Sparks generated during cutting can ignite flammable materials.

Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools.

Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers; water may be used for general fires but not for electrical fires where live equipment is involved.

Bosch GCM 12 GDL Professional Gliding Mitre Saw

Bosch GCM 12 GDL Professional Gliding Mitre Saw

PRIMARY USES

1. Highest Precision Cutting for Demanding Professional Applications

2. High-Capacity Cutting

Primary Use: The saw’s substantial cutting capacity allows for handling large workpieces with ease.

How it helps: With a 0° cutting capacity of 104 x 341 mm, the saw is capable of cutting through wide boards and large timber beams in a single pass . Its versatility is further enhanced by a 45° mitre cutting capacity of 104 x 240 mm and a 45° bevel cutting capacity of 51 x 341 mm .

SECONDARY USES

1. Flooring Installation: Cuts floor panels and planks with high precision for a perfect fit.

2. Moulding and Trim Work: Accurately cuts mitres and bevels for crown moulding, baseboards, and other architectural details.

3. Furniture Making: Produces precise cuts for furniture frames and components.

4. Aluminium Cutting: (With correct blade) Suitable for cutting aluminium profiles.

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Gliding mitre saw; not a medical device.

Designation: Bosch GCM 12 GDL Professional

Order Number: 0.601.B23.600

Rated Input Power: 2000W (1800W in some variants)

No-Load Speed: 3,800 – 4,000 rpm

Saw Blade Diameter: 305mm

Saw Blade Bore Diameter: 30mm (25.4mm in some variants)

Weight: 29.4 – 32.1 kg

Tool Dimensions (W x L x H): 670 x 1100 x 740 mm

Mitre Setting: 52° L / 60° R

Bevel Setting: 47° L / 47° R

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Rotational sawing with glide-arm mechanism for mitre, bevel, and cross-cutting.

Glide Arm System: Innovative, maintenance-free, extremely robust for lasting precision .

Motor: Powerful 2000W motor .

Laser: Precision double line laser (Class 1, <1mW) for highly accurate cut alignment .

Cutting Capacity, 0°: 104 x 341 mm .

Cutting Capacity, 45° Mitre: 104 x 240 mm .

Cutting Capacity, 45° Bevel: 51 x 341 mm .

Safety & Convenience Features: Intelligent brake system, soft start .

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Mount on a sturdy workbench or stand . Secure the workpiece with the clamp .

Usage Instructions: Adjust the mitre and bevel angles using the clearly marked scales and secure the settings. Use the double line laser for precise alignment. Lower the blade smoothly for accurate cuts .

Dust Extraction: Equipped with Click & Clean dust extraction system compatibility .

Storage Conditions: Store in a dry, secure place. Use the transport safety lock .

Cleaning: Clean the housing and blade with a soft, dry cloth.

Included Accessories: Insert plate, Expert for Wood saw blade, clamp, hex key, stop plate .

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: Power tool; high risk of injury from rotating blade, kickback, and flying debris. Eye protection and hearing protection required.

Safety Features: Transparent blade guard, intelligent brake system .

Regulatory: Complies with applicable safety standards.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a dry, secure place.

Inspection: Regularly inspect the blade for damage and the power cord for wear.

Usage: Always unplug before changing blades or performing maintenance. Secure the workpiece firmly before cutting.

1. SAFETY PRECAUTIONS

Personal Protective Equipment (PPE): Always wear safety goggles and hearing protection. Use respiratory protection when cutting materials that generate dust. Wear protective gloves when handling blades.

Electrical Safety: Check power cord and extension cord for damage before use. Do not operate in wet conditions.

Kickback Hazard: Maintain a firm grip and proper stance. Ensure the workpiece is securely clamped. Do not force the saw; allow it to cut at its own pace.

Blade Safety: Ensure the blade is correctly sized and mounted. Never use damaged blades.

Dust Hazard: Wood dust can be hazardous. Use appropriate respiratory protection and dust extraction where possible.

Maintenance: Unplug the tool before changing blades or performing maintenance. Allow the tool to cool before storing.

Training requirement: Operators must be trained on correct usage, blade selection, and safety procedures. Supervisors should ensure all safety protocols are followed.

2. FIRST AID MEASURES

Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean water for at least 15 minutes, holding eyelids open. Seek medical attention.

Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Skin Contact (dust): Wash skin with soap and water. If irritation develops, seek medical attention.

Inhalation of Dust: Move a person to fresh air. If symptoms persist (coughing, difficulty breathing), seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: The tool is not flammable, but plastic casing may burn if exposed to fire. Sparks generated during cutting can ignite flammable materials.

Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools.

Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers; water may be used for general fires but not for electrical fires where live equipment is involved.

Related products

BRANDS

FOLLOW US