Bosch GWS 2200 Professional Angle Grinder Amaris Hardware Solutions

Click to enlarge

Bosch GWS 2200 Professional Angle Grinder

WhatsApp Order

The Bosch GWS 2200 Professional Angle Grinder features a powerful 2200W motor with 6,500 rpm no-load speed. Available in 180mm and 230mm disc diameter variants. Features M14 spindle thread, barrel handle design, PROTection Switch or lockable switch depending on variant, and weighs 5.4kg. The patented motor delivers high material removal rates with low breakdown rates. Suitable for construction workers, metal fabricators, welders, and demolition professionals. Order numbers: 0.601.8C1.120 (230mm), 0.601.8C1.080 (230mm), 0.601.8C1.0P0 (230mm).

Compare

Add to wishlist

Categories: POWER TOOLS, Grinders & Sanders Tags: 180mm Grinder, 2200W Angle Grinder, 230mm Grinder, Angle Grinder, Bosch GWS 2200, Bosch Professional, construction tool, demolition tool, Grinding, heavy-duty grinder, M14 Grinder, Metal Cutting, metal fabrication, Polishing, power tool

Description

Table of Contents

Bosch GWS 2200 Professional Angle Grinder

PRIMARY USES

1. Heavy-Duty Cutting and Grinding for Construction and Metal Fabrication

Primary Use: A powerful angle grinder (2200W motor, 180mm and 230mm disc options) used for heavy-duty cutting, grinding, and surface preparation in metal, stone, and concrete. Essential for construction workers, metal fabricators, welders, and demolition professionals requiring high material removal rates for demanding applications.

How it helps: For construction and metalworking professionals, the grinder delivers best-in-class performance with its patented motor providing high material removal rates. The barrel handle design offers excellent control and comfort during extended use, reducing user fatigue. The 2200W motor with 6,500 rpm no-load speed ensures fast work progress on tough materials. The M14 spindle thread accepts a wide range of standard accessories including cutting discs, grinding wheels, flap discs, and wire brushes.

2. Heavy Material Removal and Surface Preparation

Primary Use: Removes heavy welds, scales, and rust from metal surfaces; grinds concrete and stone surfaces.

How it helps: The powerful motor and robust components ensure low breakdown rates and long service life even under continuous heavy loads. The lower heating of the overall system extends tool lifetime, while improved motor contact delivers longer carbon brush lifetime.

SECONDARY USES

1. Metal Cutting: Cuts through steel rebar, pipes, and structural steel with appropriate cutting discs.

2. Stone and Concrete Cutting: Cuts tiles, bricks, and concrete with diamond cutting wheels.

3. Surface Finishing: Prepares surfaces for welding or painting by removing rust and old coatings.

4. Polishing: With appropriate polishing accessories, restores shine to metal surfaces.

About brand

**Bosch** is a leading German brand founded in **1886**, renowned for its high-quality, innovative, and reliable engineering solutions. In the hardware industry, Bosch is best known for its durable power tools, measuring equipment, and accessories, trusted by professionals and DIY users worldwide. With a strong focus on performance, precision, and innovation, Bosch continues to set the standard for quality in construction, manufacturing, and home improvement.

KEY PRODUCT FEATURES

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Angle grinder; not a medical device.
Designation: Bosch GWS 2200 Professional
Order Numbers: 0.601.8C1.120 (230mm) , 0.601.8C1.080 (230mm) , 0.601.8C1.0P0 (230mm)
Rated Input Power: 2200W
No-Load Speed: 6,500 rpm
Disc Diameter: 180mm and 230mm variants
Grinding Spindle Thread: M14
Weight: 5.4kg
Voltage: 220-240V AC, 50Hz
Main Handle: Barrel design

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Rotational cutting, grinding, and polishing via interchangeable discs.
Motor Type: Patented Bosch motor for high material removal rate
Cooling: Lower heating for extended tool lifetime
Vibration Emission Value ah: 2.5 m/s²
Uncertainty K: 1.5 m/s²
Sound Pressure Level: 104 dB(A)
Sound Power Level: 93 dB(A)
Cable Length: 2.5m
Disc Compatibility: Cutting discs, grinding wheels, flap discs, wire brush wheels, diamond cutting wheels

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Ensure the disc guard is correctly fitted. Select the correct disc for the task. Check the disc for damage.
Usage Instructions: Allow tool to reach full speed before contacting the workpiece. Apply moderate pressure. Use the barrel handle for comfortable two-handed operation.
Switch Type: Protection Switch or Lockable Switch depending on variant
Storage Conditions: Store in a dry, secure place.
Cleaning: Clean housing with soft, dry cloth. Keep air vents clear.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: High-speed rotating power tool; risk of injury from disc shattering, flying debris, and sparks. Eye protection, face shield, hearing protection, and heavy-duty gloves required.
Disc Safety: Ensure disc is rated for 6,500 rpm tool speed. M14 spindle thread.
Included Accessories: Protective guard, backing flange, locking nut, auxiliary handle, two-hole spanner.
Country of Origin: Not specified
Regulatory: Complies with applicable safety standards.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a dry, secure place.
Inspection: Regularly inspect tools, discs, and accessories for damage. Check carbon brushes and replace if worn.
Usage: Always unplug before changing discs or performing maintenance.

SAFETY HANDLING PRECAUTIONS

1. SAFETY PRECAUTIONS

Personal Protective Equipment (PPE): Always wear safety goggles or face shield, hearing protection, heavy-duty gloves, and appropriate respiratory protection. For heavy-duty use, wear a full-face shield and leather apron.

Kickback Hazard: Hold tool firmly with both hands. Do not stand directly behind the disc. Use the correct disc for the task. The 2200W motor generates high torque and is prone to kickback – maintain a secure stance.

Disc Safety: Inspect discs for damage before use. Use discs rated for grinder speed (6,500 rpm). Do not use damaged or cracked discs. Ensure the disc guard is correctly positioned between operator and disc.

Electrical Safety: Use Residual Current Device (RCD). Do not operate in wet conditions or near water. Check power cord and extension cord for damage before use.

Fire Hazard: Sparks can ignite flammable materials. Clear work area. Do not use near flammable substances. Have a fire extinguisher readily available.

Dust Hazard: Some materials generate hazardous dust (silica from masonry, lead from old paint, chromium from stainless steel). Use local exhaust ventilation and appropriate respiratory protection (at least P2 or N95 mask).

Maintenance: Unplug tool before changing accessories or performing maintenance. Allow the tool to cool before storing.

Training requirement: Operators must be trained on correct usage, disc selection, and safety procedures. Supervisors should ensure all safety protocols are followed.

2. FIRST AID MEASURES

Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean, lukewarm water for at least 15 minutes, holding eyelids open. Seek medical attention.

Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Skin Contact (dust): Wash skin with soap and water. If irritation develops, seek medical attention.

Inhalation of Dust: Move a person to fresh air. If symptoms persist (coughing, difficulty breathing), seek medical attention.

Burn Injury (hot metal or disc): Immediately cool affected area with cool running water for at least 10 minutes. Cover with sterile dressing. Seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: Grinder is not flammable, but sparks generated during use can ignite flammable materials. Plastic casing may burn if exposed to fire.

Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools.

Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers; water may be used for general fires but not for electrical fires where live equipment is involved.

Bosch GWS 2200 Professional Angle Grinder

Bosch GWS 2200 Professional Angle Grinder

PRIMARY USES

1. Heavy-Duty Cutting and Grinding for Construction and Metal Fabrication

2. Heavy Material Removal and Surface Preparation

Primary Use: Removes heavy welds, scales, and rust from metal surfaces; grinds concrete and stone surfaces.

How it helps: The powerful motor and robust components ensure low breakdown rates and long service life even under continuous heavy loads. The lower heating of the overall system extends tool lifetime, while improved motor contact delivers longer carbon brush lifetime.

SECONDARY USES

1. Metal Cutting: Cuts through steel rebar, pipes, and structural steel with appropriate cutting discs.

2. Stone and Concrete Cutting: Cuts tiles, bricks, and concrete with diamond cutting wheels.

3. Surface Finishing: Prepares surfaces for welding or painting by removing rust and old coatings.

4. Polishing: With appropriate polishing accessories, restores shine to metal surfaces.

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Angle grinder; not a medical device.

Designation: Bosch GWS 2200 Professional

Order Numbers: 0.601.8C1.120 (230mm) , 0.601.8C1.080 (230mm) , 0.601.8C1.0P0 (230mm)

Rated Input Power: 2200W

No-Load Speed: 6,500 rpm

Disc Diameter: 180mm and 230mm variants

Grinding Spindle Thread: M14

Weight: 5.4kg

Voltage: 220-240V AC, 50Hz

Main Handle: Barrel design

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Rotational cutting, grinding, and polishing via interchangeable discs.

Motor Type: Patented Bosch motor for high material removal rate

Cooling: Lower heating for extended tool lifetime

Vibration Emission Value ah: 2.5 m/s²

Uncertainty K: 1.5 m/s²

Sound Pressure Level: 104 dB(A)

Sound Power Level: 93 dB(A)

Cable Length: 2.5m

Disc Compatibility: Cutting discs, grinding wheels, flap discs, wire brush wheels, diamond cutting wheels

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Ensure the disc guard is correctly fitted. Select the correct disc for the task. Check the disc for damage.

Usage Instructions: Allow tool to reach full speed before contacting the workpiece. Apply moderate pressure. Use the barrel handle for comfortable two-handed operation.

Switch Type: Protection Switch or Lockable Switch depending on variant

Storage Conditions: Store in a dry, secure place.

Cleaning: Clean housing with soft, dry cloth. Keep air vents clear.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: High-speed rotating power tool; risk of injury from disc shattering, flying debris, and sparks. Eye protection, face shield, hearing protection, and heavy-duty gloves required.

Disc Safety: Ensure disc is rated for 6,500 rpm tool speed. M14 spindle thread.

Included Accessories: Protective guard, backing flange, locking nut, auxiliary handle, two-hole spanner.

Country of Origin: Not specified

Regulatory: Complies with applicable safety standards.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a dry, secure place.

Inspection: Regularly inspect tools, discs, and accessories for damage. Check carbon brushes and replace if worn.

Usage: Always unplug before changing discs or performing maintenance.

1. SAFETY PRECAUTIONS

Personal Protective Equipment (PPE): Always wear safety goggles or face shield, hearing protection, heavy-duty gloves, and appropriate respiratory protection. For heavy-duty use, wear a full-face shield and leather apron.

Kickback Hazard: Hold tool firmly with both hands. Do not stand directly behind the disc. Use the correct disc for the task. The 2200W motor generates high torque and is prone to kickback – maintain a secure stance.

Disc Safety: Inspect discs for damage before use. Use discs rated for grinder speed (6,500 rpm). Do not use damaged or cracked discs. Ensure the disc guard is correctly positioned between operator and disc.

Electrical Safety: Use Residual Current Device (RCD). Do not operate in wet conditions or near water. Check power cord and extension cord for damage before use.

Fire Hazard: Sparks can ignite flammable materials. Clear work area. Do not use near flammable substances. Have a fire extinguisher readily available.

Dust Hazard: Some materials generate hazardous dust (silica from masonry, lead from old paint, chromium from stainless steel). Use local exhaust ventilation and appropriate respiratory protection (at least P2 or N95 mask).

Maintenance: Unplug tool before changing accessories or performing maintenance. Allow the tool to cool before storing.

Training requirement: Operators must be trained on correct usage, disc selection, and safety procedures. Supervisors should ensure all safety protocols are followed.

2. FIRST AID MEASURES

Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean, lukewarm water for at least 15 minutes, holding eyelids open. Seek medical attention.

Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Skin Contact (dust): Wash skin with soap and water. If irritation develops, seek medical attention.

Inhalation of Dust: Move a person to fresh air. If symptoms persist (coughing, difficulty breathing), seek medical attention.

Burn Injury (hot metal or disc): Immediately cool affected area with cool running water for at least 10 minutes. Cover with sterile dressing. Seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: Grinder is not flammable, but sparks generated during use can ignite flammable materials. Plastic casing may burn if exposed to fire.

Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools.

Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers; water may be used for general fires but not for electrical fires where live equipment is involved.

Related products

BRANDS

FOLLOW US