Bosch Brad Point 7-Piece Wood Drill Bit Set Amaris Hardware Solutions
Bosch Brad Point 7-Piece Wood Drill Bit Set Amaris Hardware Solutions
Bosch Brad Point 7-Piece Wood Drill Bit Set Amaris Hardware Solutions
Bosch Brad Point 7-Piece Wood Drill Bit Set Amaris Hardware Solutions
Bosch Brad Point Drill Bits Amaris Hardware Solutions
Bosch Brad Point Drill Bits
Back to products
Bosch Auger Bit Hexagon
Bosch Auger Bit Hexagon
Bosch

Bosch Brad Point Drill Bits

WhatsApp Order
The Bosch Brad Point Drill Bits feature a sharp centre point for precise positioning without wandering, twin spurs for clean entry holes and splinter-free finish, and fast chip removal flute design. Individual sizes available from d8mm to d16mm with lengths varying from 75mm to 160mm. 7-piece set (3,4,5,6,7,8,10mm). Suitable for carpenters, cabinet makers, joiners, and woodworkers for precision drilling in wood. Order numbers: 2608596305 (d8mm), 2608596307 (d10mm), 2608596309 (d12mm), 2608596311 (d14mm), 2608596313 (d16mm), 2607017034 (7-piece set 3-10mm).
Compare
Add to wishlist
Categories: , Tags: , , , , , , , , , , ,
Description

Table of Contents

Bosch Brad Point Drill Bits

PRIMARY USES

1. Precision Drilling in Wood for Carpentry and Joinery
Primary Use: A range of brad point drill bits (d8mm to d16mm, and 7-piece set 3-10mm) used for precise, clean drilling in wood. Essential for joinery, furniture making, and cabinet installation where accurate hole placement and clean entry/exit are critical.
How it helps: For carpenters, cabinet makers, and joiners, the brad point drill bits provide accurate, splinter-free holes in wood. The sharp centre point ensures precise positioning without wandering, while the two spurs cut clean edges at the entry point, delivering a clean, splinter-free finish. The specially designed flute geometry provides fast chip removal, reducing friction and extending bit life. The 7-piece set (3-10mm) covers the most common sizes for furniture assembly and cabinet hardware, while individual bits from d8mm to d16mm are available for larger holes.
2. Furniture and Cabinet Assembly
Primary Use: Drills precise holes for dowels, hinges, shelf supports, and cam lock fittings in furniture and cabinet construction.
How it helps: The brad point tip ensures holes are positioned exactly where intended, preventing misalignment in furniture assembly. Clean entry holes mean no splintering on visible surfaces, reducing the need for sanding or filling. The range of sizes from 3mm to 16mm covers all common dowel diameters and hardware fittings used in modern cabinetry.
3. Dowel Hole Drilling
Primary Use: Creates accurate dowel holes for strong, aligned furniture joints.
How it helps: The precision tip ensures dowel holes are perfectly aligned, resulting in strong, flush joints. Clean, accurate holes reduce the risk of glue squeeze-out and ensure consistent fit across multiple workpieces.

SECONDARY USES

1. Cabinet Hardware Installation: Drills holes for hinges, handles, drawer slides, and shelf supports.
2. Model Making: Provides precise holes for detailed woodwork and model construction.
3. DIY and Home Improvement: Drills clean holes for shelving, curtain rails, and general household projects.
4. Timber Joinery: Creates holes for mortise and tenon joints, dowel joints, and other timber connections.
About brand
**Bosch** is a leading German brand founded in **1886**, renowned for its high-quality, innovative, and reliable engineering solutions. In the hardware industry, Bosch is best known for its durable power tools, measuring equipment, and accessories, trusted by professionals and DIY users worldwide. With a strong focus on performance, precision, and innovation, Bosch continues to set the standard for quality in construction, manufacturing, and home improvement.
KEY PRODUCT FEATURES

1. BASIC IDENTIFICATION ATTRIBUTES

  • Device Type: Wood drill bit; not a medical device.
  • Designation: Bosch Brad Point Drill Bits
  • Tip Type: Brad point with sharp centre point
  • Country of Origin: China
INDIVIDUAL BITS SPECIFICATIONS
Order Number
Size
Length (mm)
Total Length (mm)
2608596303
d6mm
57mm
93mm
2608596305
d8mm
75mm
117mm
2608596307
d10mm
80mm
120mm
2608596309
d12mm
96mm
151mm
2608596311
d14mm
96mm
151mm
2608596313
d16mm
100mm
160mm
7-PIECE SET SPECIFICATIONS (2607017034)
  • Contents: 7 pieces
  • Sizes: 3, 4, 5, 6, 7, 8, 10mm
  • Application: Precision wood drilling

2. TECHNICAL & PERFORMANCE PROPERTIES

  • Primary Action: Precision drilling in wood via brad point tip and twin cutting spurs.
  • Tip Design: Sharp centre point for precise positioning
  • Cutting Edge: Twin spurs for clean entry holes
  • Flute Design: Specially designed for fast chip removal
  • Sizes: 3mm to 16mm
  • Application: Wood only (not suitable for concrete, metal, or masonry)
  • Benefits: Splinter-free holes, precise positioning, fast drilling

3. PHYSICAL & OPERATIONAL PROPERTIES

  • Preparation: Select appropriate bit size for the task. Insert the bit into the drill chuck and tighten securely.
  • Usage Instructions: Position the brad point at the drilling mark. Apply steady pressure and drill at appropriate speed. The centre point ensures precise positioning while the spurs create clean entry holes.
  • Storage Conditions: Store in a dry place. Keep bits in the provided case or organiser to prevent damage.
  • Cleaning: Clean bits after use with a soft cloth. Remove wood residue from flutes.

4. SAFETY & COMPLIANCE ATTRIBUTES

  • Safety Classification: Wood drill bit; no laser or electrical hazards. No special safety precautions required beyond normal use.
  • Material Safety: High-quality steel construction
  • Regulatory: Complies with relevant safety standards.

5. STORAGE & HANDLING ATTRIBUTES

  • Storage: Store in a dry, secure place. Keep bits in the provided case or organiser to prevent damage and maintain sharpness.
  • Inspection: Regularly inspect bits for damage or wear. Replace dull or damaged bits to ensure clean drilling.
  • Usage: Do not use concrete, metal, or masonry. Use only for wood and wood-based materials.
SAFETY HANDLING PRECAUTIONS

1. SAFETY PRECAUTIONS

Operational Safety: Always wear safety glasses when drilling. Secure the workpiece firmly before drilling to prevent spinning. Do not wear loose clothing or gloves that could become entangled in the drill.
Tool Safety: Ensure the bit is securely tightened in the chuck before use. Use appropriate drilling speed for the bit size and wood type. Allow the bit to cool between uses.
Maintenance: Clean bits after use. Remove wood residue from flutes. Do not use aggressive cleaning agents. Store in a dry place to prevent rust.
Training requirement: No specialised training required. Basic instruction on drill operation and bit selection is recommended.

2. FIRST AID MEASURES

Eye Exposure (dust/debris): Rinse immediately with plenty of clean water for at least 15 minutes. Seek medical attention if irritation persists.
Skin Contact: Wash with soap and water.
Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.
Inhalation: Move to fresh air. If symptoms persist, seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: The bits themselves are not flammable. Packaging and storage cases may burn if exposed to fire.
Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools and packaging.
Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers.

Related products

Chain Saw Adapter for Angle Grinder Amaris Hardware
-5%
Compare

Chain Saw Adapter for Angle Grinder

Original price was: $ 25.77.Current price is: $ 24.48.

Chain Saw Adapter for Angle Grinder typically refer to components that allow you to attach or use certain accessories with your chainsaw or grinder.

  1. Chainsaw Adapter:
    • A device that enables the use of a 12-inch chainsaw blade on a chainsaw designed for a different blade size. This adapter allows you to customize or replace the original chainsaw blade with a 12-inch one, potentially for different cutting applications.
  2. Grinder Adapter:
    • An accessory that allows you to attach a grinder to a 12-inch chainsaw, converting it into a chainsaw chain sharpener. This adapter facilitates the grinding or sharpening of the chainsaw chain, ensuring optimal cutting performance.
Add to wishlist
Chuck Die Grinder Amaris Hardware
-5%
Compare

Chuck Die Grinder

Original price was: $ 30.77.Current price is: $ 29.23.

A Chuck Die Grinder is a handheld power tool equipped with a collet or chuck that holds a rotary burr or abrasive head. This tool is commonly used for precision grinding, polishing, and shaping of metal, wood, plastic, and other materials. Chuck Die Grinders are versatile and compact, allowing for intricate and detailed work in various applications, including metalworking, woodworking, and fabrication. They are widely employed in industries such as machining, automotive, and aerospace, as well as by hobbyists and craftsmen for tasks requiring fine control and high-speed material removal.

Add to wishlist
Circular Saw Amaris Hardware
-5%
Compare

Circular Saw

Original price was: $ 107.69.Current price is: $ 102.31.

A circular saw is a power tool equipped with a rotating circular blade, typically with teeth along its edge, designed for cutting various materials such as wood, plastic, metal, or masonry. It is commonly used in carpentry, construction, and other applications to make straight or beveled cuts with precision and efficiency. The circular saw is versatile and can be handheld or mounted on a table or other stationary surface, depending on the specific model and intended use.

Add to wishlist
Circular Saw Blade for Wood Amaris Hardware
-5%
Compare

Circular Saw Blade for Wood

Original price was: $ 31.54.Current price is: $ 29.96.

A circular saw blade for wood is a cutting tool designed specifically for use with a circular saw. It typically consists of a flat, circular disc with sharp teeth along its outer edge. The blade is mounted onto the arbor of the circular saw, and as the saw operates, the blade spins rapidly to cut through wood materials. Circular saw blades for wood are specifically engineered to make efficient and clean cuts in wood, and they come in various sizes and tooth configurations to suit different cutting tasks and wood types. The teeth on the blade are strategically shaped and arranged to ensure smooth and precise cutting while minimizing splintering and tear-out on the wood surface.

Add to wishlist
Finishing Sander Amaris Hardware
-5%
Compare

Finishing Sander

Original price was: $ 41.92.Current price is: $ 39.82.

The finishing sander is a high-performance power tool designed to deliver smooth, even surfaces on wood, metal, or painted materials. Its ergonomic design allows for comfortable handling during extended use, while its powerful motor ensures consistent sanding performance. Perfect for removing minor imperfections, preparing surfaces for paint or varnish, and achieving a professional-quality finish, this tool is ideal for carpenters, woodworkers, DIY enthusiasts, and home improvement projects. The finishing sander is compatible with a variety of sanding pads and accessories, making it versatile for different applications and finishing requirements.

Add to wishlist
Gasoline chain saw Amaris Hardware
-5%
Compare

Gasoline Chain Saw

Original price was: $ 141.92.Current price is: $ 134.82.

A Gasoline Chain Saw is a portable, mechanical cutting tool powered by an internal combustion engine that runs on gasoline. It typically consists of a chain with teeth attached to a guide bar, driven by the engine, and is commonly used for tasks such as tree felling, limb pruning, and wood cutting. The gasoline engine provides the necessary power to drive the chain, making the chainsaw a versatile tool for various outdoor cutting applications.

Add to wishlist
Gasoline Hedge Trimmer Amaris Hardware (1)
-5%
Compare

Gasoline Hedge Trimmer

Original price was: $ 203.85.Current price is: $ 193.66.

A gasoline hedge trimmer is a handheld gardening tool powered by a gasoline engine, designed for trimming and shaping hedges, bushes, and shrubs. It consists of a cutting blade or blades, typically reciprocating, attached to a long shaft with a handle or grip for ease of use. The gasoline engine provides the necessary power to drive the blades, offering mobility and independence from electrical outlets, making it suitable for use in outdoor settings where access to electricity may be limited. Gasoline hedge trimmers are valued for their versatility, allowing users to manicure and maintain landscaping with efficiency and precision.

Add to wishlist
Glass Drill Set Hexagonal Handle Amaris Hardware
-5%
Compare

Glass Drill Set Hexagonal Handle

Original price was: $ 19.23.Current price is: $ 18.27.

A Glass Drill Set Hexagonal Handle typically refers to a collection of five drill bits specifically designed for drilling holes in glass surfaces. The term "hexagonal handle" indicates that the shank of each drill bit has a hexagonal (six-sided) shape, which can provide a better grip and prevent slipping when used with a compatible drill. These drill bits are specifically crafted for working with glass materials, offering precision and minimizing the risk of cracking or damaging the glass during the drilling process. The set may include different-sized bits to accommodate various hole diameters.

Add to wishlist