Bosch Brad Point Drill Bits Amaris Hardware Solutions
Bosch Brad Point Drill Bits Amaris Hardware Solutions
Bosch Brad Point Drill Bits Amaris Hardware Solutions
Bosch Brad Point Drill Bits Amaris Hardware Solutions
Bosch Self Cut Speed Spade Bits
Bosch Self Cut Speed Spade Bits
Back to products
Bosch Brad Point 7-Piece Wood Drill Bit Set Amaris Hardware Solutions
Bosch Brad Point Drill Bits
Bosch

Bosch Brad Point Drill Bits

WhatsApp Order
The Bosch Brad Point Drill Bits feature a sharp centre point for precise positioning without wandering, twin spurs for clean entry holes and splinter-free finish, and fast chip removal flute design. Individual sizes available from d8mm to d16mm with lengths varying from 75mm to 160mm. 7-piece set (3,4,5,6,7,8,10mm). Suitable for carpenters, cabinet makers, joiners, and woodworkers for precision drilling in wood. Order numbers: 2608596305 (d8mm), 2608596307 (d10mm), 2608596309 (d12mm), 2608596311 (d14mm), 2608596313 (d16mm), 2607017034 (7-piece set 3-10mm).
Compare
Add to wishlist
Categories: , Tags: , , , , , , , , , , ,
Description

Table of Contents

Bosch Brad Point Drill Bits

PRIMARY USES

1. Precision Drilling in Wood for Carpentry and Joinery
Primary Use: A range of brad point drill bits (d8mm to d16mm, and 7-piece set 3-10mm) used for precise, clean drilling in wood. Essential for joinery, furniture making, and cabinet installation where accurate hole placement and clean entry/exit are critical.
How it helps: For carpenters, cabinet makers, and joiners, the brad point drill bits provide accurate, splinter-free holes in wood. The sharp centre point ensures precise positioning without wandering, while the two spurs cut clean edges at the entry point, delivering a clean, splinter-free finish. The specially designed flute geometry provides fast chip removal, reducing friction and extending bit life. The 7-piece set (3-10mm) covers the most common sizes for furniture assembly and cabinet hardware, while individual bits from d8mm to d16mm are available for larger holes.
2. Furniture and Cabinet Assembly
Primary Use: Drills precise holes for dowels, hinges, shelf supports, and cam lock fittings in furniture and cabinet construction.
How it helps: The brad point tip ensures holes are positioned exactly where intended, preventing misalignment in furniture assembly. Clean entry holes mean no splintering on visible surfaces, reducing the need for sanding or filling. The range of sizes from 3mm to 16mm covers all common dowel diameters and hardware fittings used in modern cabinetry.
3. Dowel Hole Drilling
Primary Use: Creates accurate dowel holes for strong, aligned furniture joints.
How it helps: The precision tip ensures dowel holes are perfectly aligned, resulting in strong, flush joints. Clean, accurate holes reduce the risk of glue squeeze-out and ensure consistent fit across multiple workpieces.

SECONDARY USES

1. Cabinet Hardware Installation: Drills holes for hinges, handles, drawer slides, and shelf supports.
2. Model Making: Provides precise holes for detailed woodwork and model construction.
3. DIY and Home Improvement: Drills clean holes for shelving, curtain rails, and general household projects.
4. Timber Joinery: Creates holes for mortise and tenon joints, dowel joints, and other timber connections.
About brand
**Bosch** is a leading German brand founded in **1886**, renowned for its high-quality, innovative, and reliable engineering solutions. In the hardware industry, Bosch is best known for its durable power tools, measuring equipment, and accessories, trusted by professionals and DIY users worldwide. With a strong focus on performance, precision, and innovation, Bosch continues to set the standard for quality in construction, manufacturing, and home improvement.
KEY PRODUCT FEATURES

1. BASIC IDENTIFICATION ATTRIBUTES

  • Device Type: Wood drill bit; not a medical device.
  • Designation: Bosch Brad Point Drill Bits
  • Tip Type: Brad point with sharp centre point
  • Country of Origin: China
INDIVIDUAL BITS SPECIFICATIONS
Order Number
Size
Length (mm)
Total Length (mm)
2608596303
d6mm
57mm
93mm
2608596305
d8mm
75mm
117mm
2608596307
d10mm
80mm
120mm
2608596309
d12mm
96mm
151mm
2608596311
d14mm
96mm
151mm
2608596313
d16mm
100mm
160mm
7-PIECE SET SPECIFICATIONS (2607017034)
  • Contents: 7 pieces
  • Sizes: 3, 4, 5, 6, 7, 8, 10mm
  • Application: Precision wood drilling

2. TECHNICAL & PERFORMANCE PROPERTIES

  • Primary Action: Precision drilling in wood via brad point tip and twin cutting spurs.
  • Tip Design: Sharp centre point for precise positioning
  • Cutting Edge: Twin spurs for clean entry holes
  • Flute Design: Specially designed for fast chip removal
  • Sizes: 3mm to 16mm
  • Application: Wood only (not suitable for concrete, metal, or masonry)
  • Benefits: Splinter-free holes, precise positioning, fast drilling

3. PHYSICAL & OPERATIONAL PROPERTIES

  • Preparation: Select appropriate bit size for the task. Insert the bit into the drill chuck and tighten securely.
  • Usage Instructions: Position the brad point at the drilling mark. Apply steady pressure and drill at appropriate speed. The centre point ensures precise positioning while the spurs create clean entry holes.
  • Storage Conditions: Store in a dry place. Keep bits in the provided case or organiser to prevent damage.
  • Cleaning: Clean bits after use with a soft cloth. Remove wood residue from flutes.

4. SAFETY & COMPLIANCE ATTRIBUTES

  • Safety Classification: Wood drill bit; no laser or electrical hazards. No special safety precautions required beyond normal use.
  • Material Safety: High-quality steel construction
  • Regulatory: Complies with relevant safety standards.

5. STORAGE & HANDLING ATTRIBUTES

  • Storage: Store in a dry, secure place. Keep bits in the provided case or organiser to prevent damage and maintain sharpness.
  • Inspection: Regularly inspect bits for damage or wear. Replace dull or damaged bits to ensure clean drilling.
  • Usage: Do not use on concrete, metal, or masonry. Use only for wood and wood-based materials.
SAFETY HANDLING PRECAUTIONS

1. SAFETY PRECAUTIONS

Operational Safety: Always wear safety glasses when drilling. Secure the workpiece firmly before drilling to prevent spinning. Do not wear loose clothing or gloves that could become entangled in the drill.
Tool Safety: Ensure the bit is securely tightened in the chuck before use. Use appropriate drilling speed for the bit size and wood type. Allow the bit to cool between uses.
Maintenance: Clean bits after use. Remove wood residue from flutes. Do not use aggressive cleaning agents. Store in a dry place to prevent rust.
Training requirement: No specialised training required. Basic instruction on drill operation and bit selection is recommended.

2. FIRST AID MEASURES

Eye Exposure (dust/debris): Rinse immediately with plenty of clean water for at least 15 minutes. Seek medical attention if irritation persists.
Skin Contact: Wash with soap and water.
Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.
Inhalation: Move to fresh air. If symptoms persist, seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: The bits themselves are not flammable. Packaging and storage cases may burn if exposed to fire.
Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools and packaging.
Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers.

Related products

Big Battery Pro Amaris Hardware
-5%
Compare

Big Battery Pro

Original price was: $ 50.00.Current price is: $ 47.50.

A " Big Battery Pro" typically refers to a rechargeable lithium-ion battery with a nominal voltage of 20 volts. The nominal voltage represents the average voltage output over the majority of the battery's discharge cycle. It's important to note that the actual voltage during use may fluctuate within a specified range.

These batteries are commonly used to power various devices, including power tools, garden equipment, and other portable electronic devices. The "20V" designation is a standardized measure indicating the electrical potential of the battery, providing a general indication of its power output.

Keep in mind that when considering a 20V battery, it's essential to verify compatibility with the specific device or tool it is intended for. Additionally, different manufacturers may have variations in the actual voltage, capacity, and features of their 20V battery products. Checking the product documentation or contacting the manufacturer for detailed specifications is recommended for accurate information.

Add to wishlist
Circular Saw Blade for Aluminum Amaris Hardware
-5%
Compare

Circular Saw Blade for Aluminum

Original price was: $ 43.46.Current price is: $ 41.29.

A circular saw blade for aluminum is a cutting tool specifically designed for use with a circular saw to cut through aluminum materials. It features specialized teeth and design elements to optimize the cutting process for aluminum, which has different characteristics compared to wood or other materials. These blades typically have a high tooth count, often with specially shaped teeth, and may incorporate coatings or materials that reduce heat buildup during cutting. The goal is to provide efficient and clean cuts through aluminum while minimizing the risk of overheating or material deformation.

Add to wishlist
Circular Saw Blade for Wood Amaris Hardware
-5%
Compare

Circular Saw Blade for Wood

Original price was: $ 31.54.Current price is: $ 29.96.

A circular saw blade for wood is a cutting tool designed specifically for use with a circular saw. It typically consists of a flat, circular disc with sharp teeth along its outer edge. The blade is mounted onto the arbor of the circular saw, and as the saw operates, the blade spins rapidly to cut through wood materials. Circular saw blades for wood are specifically engineered to make efficient and clean cuts in wood, and they come in various sizes and tooth configurations to suit different cutting tasks and wood types. The teeth on the blade are strategically shaped and arranged to ensure smooth and precise cutting while minimizing splintering and tear-out on the wood surface.

Add to wishlist
Fast Charger Amaris Hardware
-5%
Compare

Fast Charger

Original price was: $ 23.85.Current price is: $ 22.66.

A fast charger is a device designed to quickly recharge compatible batteries with a voltage rating of 20 volts. The "fast" designation implies that the charger is engineered to deliver a higher charging current, allowing for a more rapid replenishment of the battery's energy capacity compared to standard chargers. This type of charger is commonly used for power tools, electronic devices, or other equipment that operates on 20V batteries, providing users with a more efficient and time-saving charging solution.

Add to wishlist
Fibre Strengthened Resin Cutting Wheel Amaris Hardware
-5%
Compare

Fibre Strengthened Resin Cutting Wheel

Original price was: $ 12.42.Current price is: $ 11.80.

A Fibre Strengthened Resin Cutting Wheel refers to a cutting tool designed for various machining applications, particularly in the context of metalworking or construction. This type of cutting wheel is composed of a resin matrix, which serves as a binding material, reinforced with fibers for added strength and durability. The fibers are typically made of materials such as fiberglass or other composite materials.

The combination of resin and fibers enhances the cutting wheel's structural integrity, making it more resistant to breakage and providing improved performance during cutting operations. The reinforced design allows the wheel to withstand higher levels of mechanical stress and heat generated during cutting processes. Fiber-strengthened resin cutting wheels are commonly used in applications like cutting metal, steel, or other hard materials, where precision and durability are crucial.

Add to wishlist
Forstner Bit Set Amaris Hardware
-5%
Compare

Forstner Bit Set

Original price was: $ 35.77.Current price is: $ 33.98.

A Forstner bit set typically refers to a collection of five Forstner drill bits designed for woodworking applications. Forstner bits are specialized cutting tools used to bore flat-bottomed holes with clean and precise edges in wood. The set usually includes five bits with varying diameters, allowing users to choose the appropriate size for different projects. These bits often feature a center point for accurate positioning, two sharp outer cutting edges, and a cylindrical shape. The set is versatile and suitable for tasks like drilling holes for dowels, creating pocket holes, or countersinking screws in woodworking projects.

Add to wishlist
Forstner Bits Amaris Hardware
-5%
Compare

Forstner Bits

Original price was: $ 18.85.Current price is: $ 17.91.

A Forstner bit is a specialized woodworking drill bit designed for creating flat-bottomed holes with a clean and precise finish. Unlike traditional twist drill bits, Forstner bits have a cylindrical, flat-bottomed shape with a center point and cutting edges along the circumference. These bits are commonly used when a smooth and accurately sized hole without breakthrough is required in woodworking applications, such as for drilling holes for dowels or creating recesses for hardware like hinges. Forstner bits are known for their ability to produce clean and splinter-free boreholes, making them popular among woodworkers and cabinetmakers for tasks that demand precision and aesthetics.

Add to wishlist
Glass Drill Set Hexagonal Handle Amaris Hardware
-5%
Compare

Glass Drill Set Hexagonal Handle

Original price was: $ 19.23.Current price is: $ 18.27.

A Glass Drill Set Hexagonal Handle typically refers to a collection of five drill bits specifically designed for drilling holes in glass surfaces. The term "hexagonal handle" indicates that the shank of each drill bit has a hexagonal (six-sided) shape, which can provide a better grip and prevent slipping when used with a compatible drill. These drill bits are specifically crafted for working with glass materials, offering precision and minimizing the risk of cracking or damaging the glass during the drilling process. The set may include different-sized bits to accommodate various hole diameters.

Add to wishlist