Bosch GHO 700 Professional Planer Amaris Hardware Solutions

Bosch GHO 700 Professional Planer

WhatsApp Order

The Bosch GHO 700 Professional Planer features a powerful 700W motor, 82mm planing width, planing depth of 0-2.6mm, and adjustable rebating depth of 0-9mm. No-load speed: 16,500 rpm. Precisely machined flat aluminium base ensures a smooth, flat finish. Optimised chip ejection allows wood chips to be discarded from either the right or left side, minimising dust interference . Includes parking rest for safe storage and blade change. Supplied with 2 TCT blades, chip bag, parallel guide, and assembly wrench. Suitable for carpenters, joiners, furniture makers, and door installers. Order number: 0.601.5A9.0K1.

Compare

Add to wishlist

Categories: POWER TOOLS, Saws (Circular, Jigsaw, Reciprocating) Tags: 700W Planer, 82mm Planer, Bosch GHO 700, Bosch Professional, carpentry tool, Electric Planer, Joinery Tool, Planer, Portable Planer, Professional Planer, Rebate Planer, wood planer, woodworking tool

Description

Table of Contents

Bosch GHO 700 Professional Planer

PRIMARY USES

1. Planing and Smoothing Wood Surfaces for Carpentry and Joinery

Primary Use: A powerful portable planer (700W motor, 82mm planing width, 16,500 rpm) used for planing and smoothing wood surfaces to achieve a flat, even finish. Essential for carpenters, joiners, furniture makers, and door installers requiring precise material removal and surface preparation.

How it helps: For carpenters and joiners, the planer delivers effortless planing even on hardwoods thanks to its 700W motor and double tungsten carbide tipped (TCT) blades . The precisely machined flat aluminium base ensures a smooth and flat finish, while the consistent depth control mechanism allows for accurate material removal . The compact design with optimised centre of gravity provides controlled planing and helps prevent wrist strain for increased comfort during extended use .

2. Rebating and Edge Chamfering

Primary Use: Creates rebates (rabbets) and chamfers on edges for joinery, fitting, and decorative applications.

How it helps: The adjustable rebating depth (0-9mm) allows for precise rebate cutting, making it suitable for door installation, joinery, and cabinetry work . The V-grooves in the base plate enable easy chamfering of edges for decorative finishes .

SECONDARY USES

1. Door Installation: Planes doors to fit frames and creates rebates for hinges.

2. Furniture Making: Prepares timber surfaces and creates joinery components.

3. Flooring Installation: Levels uneven floorboards and prepares surfaces for finishing.

4. Restoration Work: Removes old finishes and levels worn surfaces.

About brand

**Bosch** is a leading German brand founded in **1886**, renowned for its high-quality, innovative, and reliable engineering solutions. In the hardware industry, Bosch is best known for its durable power tools, measuring equipment, and accessories, trusted by professionals and DIY users worldwide. With a strong focus on performance, precision, and innovation, Bosch continues to set the standard for quality in construction, manufacturing, and home improvement.

KEY PRODUCT FEATURES

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Portable electric planer; not a medical device.
Designation: Bosch GHO 700 Professional Planer
Order Number: 0 601 5A9 0K1
Rated Input Power: 700W
No-Load Speed: 16,500 rpm
Planing Width: 82mm
Planing Depth: 0-2.6mm
Rebating Depth: 0-9mm
Weight: 2.7kg
Protection Class: / II

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Planing via rotating blade head with double TCT blades.
Motor Type: 700W motor with high torque for consistent planing
Blade System: Double tungsten carbide tipped (TCT) blades
Base Plate: Precisely machined flat aluminium for smooth finish
Depth Adjustment: Consistent depth control mechanism for precise planing
Chip Ejection: Left or right side ejection via changeover lever
Dust Extraction: Chip bag included for dust collection
Sound Pressure Level: 88 dB(A)
Sound Power Level: 99 dB(A)
Vibration Level: 2.8 m/s²

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Ensure blades are sharp and correctly installed. Set cutting depth using the knob . Select chip ejection direction using the changeover lever .
Usage Instructions: Place planer base plate flat on the workpiece. Switch on using the on/off switch . Guide the planer steadily over the workpiece, applying even pressure. The V-grooves allow for chamfering edges .
Chip Ejection: Left or right side ejection for flexibility
Parking Rest: Allows the tool to be set down safely without damaging the workpiece or blades
Ergonomics: Compact design with optimised centre of gravity for controlled planing
Storage Conditions: Store in a dry, secure place.
Cleaning: Clean housing with soft, dry cloth. Empty chip bag regularly.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: Power tool; risk of injury from rotating blades and flying debris. Eye protection required.
Safety Features: Lock-off button for on/off switch prevents accidental start
Dust Extraction: Chip bag and optional dust extraction connection
Regulatory: Complies with applicable safety standards.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a dry, secure place. Use parking rest when setting down.
Maintenance: Regularly inspect blades for damage or wear. Replace blades when dull. Check drive belt periodically .
Usage: Always unplug before changing blades or performing maintenance.
Included Accessories: 2 TCT blades, chip bag, parallel guide, assembly wrench .

SAFETY HANDLING PRECAUTIONS

1. SAFETY PRECAUTIONS

Personal Protective Equipment (PPE): Always wear safety goggles when planing. Use hearing protection and respiratory protection where appropriate.

Electrical Safety: Check power cord and extension cord for damage before use. Do not operate in wet conditions or near water.

Blade Safety: Planer blades are sharp—handle with care. Unplug before changing blades. Let blades cool before touching .

Kickback Hazard: Maintain firm grip and proper stance. Do not apply excessive pressure—allow the tool to do the work.

Dust Hazard: Wood dust can be hazardous. Use appropriate respiratory protection and dust extraction where possible.

Maintenance: Unplug tool before changing blades or performing maintenance. Allow the tool to cool before storing.

Training requirement: Operators should be familiar with correct usage, blade handling, and safety procedures. Supervisors should ensure all safety protocols are followed.

2. FIRST AID MEASURES

Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Skin Contact (dust): Wash skin with soap and water. If irritation develops, seek medical attention.

Inhalation of Dust: Move to fresh air. If symptoms persist (coughing, difficulty breathing), seek medical attention.

Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean water for at least 15 minutes, holding eyelids open. Seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: The tool is not flammable, but plastic casing may burn if exposed to fire. Wood dust can be combustible.

Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools.

Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers; water may be used for general fires but not for electrical fires where live equipment is involved.

Bosch GHO 700 Professional Planer

Bosch GHO 700 Professional Planer

PRIMARY USES

1. Planing and Smoothing Wood Surfaces for Carpentry and Joinery

Primary Use: A powerful portable planer (700W motor, 82mm planing width, 16,500 rpm) used for planing and smoothing wood surfaces to achieve a flat, even finish. Essential for carpenters, joiners, furniture makers, and door installers requiring precise material removal and surface preparation.

2. Rebating and Edge Chamfering

Primary Use: Creates rebates (rabbets) and chamfers on edges for joinery, fitting, and decorative applications.

How it helps: The adjustable rebating depth (0-9mm) allows for precise rebate cutting, making it suitable for door installation, joinery, and cabinetry work . The V-grooves in the base plate enable easy chamfering of edges for decorative finishes .

SECONDARY USES

1. Door Installation: Planes doors to fit frames and creates rebates for hinges.

2. Furniture Making: Prepares timber surfaces and creates joinery components.

3. Flooring Installation: Levels uneven floorboards and prepares surfaces for finishing.

4. Restoration Work: Removes old finishes and levels worn surfaces.

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Portable electric planer; not a medical device.

Designation: Bosch GHO 700 Professional Planer

Order Number: 0 601 5A9 0K1

Rated Input Power: 700W

No-Load Speed: 16,500 rpm

Planing Width: 82mm

Planing Depth: 0-2.6mm

Rebating Depth: 0-9mm

Weight: 2.7kg

Protection Class: / II

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Planing via rotating blade head with double TCT blades.

Motor Type: 700W motor with high torque for consistent planing

Blade System: Double tungsten carbide tipped (TCT) blades

Base Plate: Precisely machined flat aluminium for smooth finish

Depth Adjustment: Consistent depth control mechanism for precise planing

Chip Ejection: Left or right side ejection via changeover lever

Dust Extraction: Chip bag included for dust collection

Sound Pressure Level: 88 dB(A)

Sound Power Level: 99 dB(A)

Vibration Level: 2.8 m/s²

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Ensure blades are sharp and correctly installed. Set cutting depth using the knob . Select chip ejection direction using the changeover lever .

Usage Instructions: Place planer base plate flat on the workpiece. Switch on using the on/off switch . Guide the planer steadily over the workpiece, applying even pressure. The V-grooves allow for chamfering edges .

Chip Ejection: Left or right side ejection for flexibility

Parking Rest: Allows the tool to be set down safely without damaging the workpiece or blades

Ergonomics: Compact design with optimised centre of gravity for controlled planing

Storage Conditions: Store in a dry, secure place.

Cleaning: Clean housing with soft, dry cloth. Empty chip bag regularly.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: Power tool; risk of injury from rotating blades and flying debris. Eye protection required.

Safety Features: Lock-off button for on/off switch prevents accidental start

Dust Extraction: Chip bag and optional dust extraction connection

Regulatory: Complies with applicable safety standards.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a dry, secure place. Use parking rest when setting down.

Maintenance: Regularly inspect blades for damage or wear. Replace blades when dull. Check drive belt periodically .

Usage: Always unplug before changing blades or performing maintenance.

Included Accessories: 2 TCT blades, chip bag, parallel guide, assembly wrench .

1. SAFETY PRECAUTIONS

Personal Protective Equipment (PPE): Always wear safety goggles when planing. Use hearing protection and respiratory protection where appropriate.

Electrical Safety: Check power cord and extension cord for damage before use. Do not operate in wet conditions or near water.

Blade Safety: Planer blades are sharp—handle with care. Unplug before changing blades. Let blades cool before touching .

Kickback Hazard: Maintain firm grip and proper stance. Do not apply excessive pressure—allow the tool to do the work.

Dust Hazard: Wood dust can be hazardous. Use appropriate respiratory protection and dust extraction where possible.

Maintenance: Unplug tool before changing blades or performing maintenance. Allow the tool to cool before storing.

Training requirement: Operators should be familiar with correct usage, blade handling, and safety procedures. Supervisors should ensure all safety protocols are followed.

2. FIRST AID MEASURES

Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Skin Contact (dust): Wash skin with soap and water. If irritation develops, seek medical attention.

Inhalation of Dust: Move to fresh air. If symptoms persist (coughing, difficulty breathing), seek medical attention.

Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean water for at least 15 minutes, holding eyelids open. Seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: The tool is not flammable, but plastic casing may burn if exposed to fire. Wood dust can be combustible.

Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools.

Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers; water may be used for general fires but not for electrical fires where live equipment is involved.

Related products

BRANDS

FOLLOW US