Bosch GWS 700 Professional Angle Grinder Amaris Hardware Solutions

Click to enlarge

Bosch GWS 700 Professional Angle Grinder

WhatsApp Order

The Bosch GWS 700 Professional Angle Grinder features a powerful 710W motor, 12,000 rpm no-load speed, and a 1.7kg lightweight design. Available in 115mm and 125mm disc diameter variants with M14 spindle thread, or 100mm variant with M10 spindle thread. Features a lockable or safety switch depending on variant, epoxy-coated housing for dust protection, sealed switch, and Service Minder Brush System. Includes protective guard, auxiliary handle, mounting flange, and clamping nut. Suitable for metal workers, vehicle fabricators, plumbers, and DIY users. Order numbers: 0.601.3A3.0K0 (115mm), 0.601.3A3.1L0 (100mm), 0.601.3A3.080 (100mm China).

Compare

Add to wishlist

Categories: POWER TOOLS, Grinders & Sanders Tags: 100mm Grinder, 115mm Grinder, 125mm Grinder, 710W Angle Grinder, Angle Grinder, Bosch GWS 700, Bosch Professional, DIY tool, Grinding, Light Duty Grinder, M14 Grinder, Metal Cutting, Metalwork Tool, Polishing, power tool

Description

Table of Contents

Bosch GWS 700 Professional Angle Grinder

PRIMARY USES

1. Light Cutting and Grinding for Metal and Stone

Primary Use: A lightweight and compact angle grinder (710W motor, 12,000 rpm, 100-125mm disc) used for cutting, grinding, deburring, and surface finishing on metal and stone . Essential for metal workers, vehicle fabricators, plumbers, and DIY users requiring reliable performance for small to medium jobs .

How it helps: For tradespeople and home users, the grinder delivers enduring performance from reliable Bosch-quality components and a high removal rate thanks to its powerful motor . The lightweight and compact design (1.7kg) ensures optimal comfort and control, reducing fatigue during extended use . The M14 or M10 spindle thread (depending on variant) provides compatibility with a wide range of accessories.

2. Overload Capacity and Dust Protection

Primary Use: Features outstanding overload capacity suitable for tough jobs, combined with effective dust protection for long tool life.

How it helps: The epoxy-coated design protects the tool from abrasive debris, while the sealed switch keeps dust from entering the switch mechanism . The Service Minder Brush System eliminates guesswork and stops the tool when preventative maintenance is required . The efficient motor with an extremely small field diameter allows users to grind or cut with ease .

SECONDARY USES

1. Surface Preparation: Removes rust and old coatings from metal surfaces.

2. Deburring: Smooths rough edges on metal workpieces.

3. Finishing: Prepares surfaces for welding or painting.

4. Concrete Grinding: Grinds and smooths concrete surfaces .

5. Wall Chasing: Creates channels in walls for pipes and cables .

About brand

**Bosch** is a leading German brand founded in **1886**, renowned for its high-quality, innovative, and reliable engineering solutions. In the hardware industry, Bosch is best known for its durable power tools, measuring equipment, and accessories, trusted by professionals and DIY users worldwide. With a strong focus on performance, precision, and innovation, Bosch continues to set the standard for quality in construction, manufacturing, and home improvement.

KEY PRODUCT FEATURES

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Angle grinder; not a medical device.
Designation: Bosch GWS 700 Professional
Order Numbers: 0.601.3A3.0K0 (115mm) , 0.601.3A3.1L0 (100mm) , 0.601.3A3.080 (100mm)
Rated Input Power: 710W
No-Load Speed: 12,000 rpm
Disc Diameter: 100mm, 115mm, and 125mm variants
Grinding Spindle Thread: M14 (115/125mm) or M10 (100mm)
Weight: 1.7kg
Protection Class: Double insulation
Country of Origin: Not specified

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Rotational cutting, grinding, and finishing via interchangeable discs.
Motor Type: Brushed motor with Service Minder Brush System
Overload Capacity: Outstanding for tough jobs
Dust Protection: Epoxy-coated housing and sealed switch mechanism
Noise/Vibration - Surface Grinding: Sound pressure 94 dB(A), sound power 102 dB(A), vibration 6.0 m/s²
Noise/Vibration - Cut-off Grinding: Vibration 6.5 m/s²
Disc Compatibility: Cutting discs, grinding wheels, flap discs, wire brushes, diamond cutting wheels
Restart Protection: Prevents uncontrolled starting after power interruption

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Ensure the disc guard is correctly fitted. Select the correct disc for the task. Check the disc for damage.
Usage Instructions: Allow tool to reach full speed before contacting the workpiece. Apply moderate pressure. Use the 2-position side auxiliary handle for comfortable operation .
Switch Type: Lockable Switch or Safety Switch depending on variant
Storage Conditions: Store in a dry, secure place.
Cleaning: Clean housing with soft, dry cloth. Keep air vents clear.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: High-speed rotating power tool; risk of injury from disc shattering, flying debris, and sparks. Eye protection, face shield, hearing protection, and heavy-duty gloves required.
Disc Safety: Ensure disc is rated for 12,000 rpm tool speed. M14 or M10 spindle thread.
Included Accessories: Protective guard, auxiliary handle, mounting flange, clamping nut
Regulatory: Complies with applicable safety standards.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a dry, secure place.
Inspection: Regularly inspect tools, discs, and accessories for damage. Check carbon brushes and replace when worn (Service Minder system stops tool when maintenance is required) .
Usage: Always unplug before changing discs or performing maintenance.

SAFETY HANDLING PRECAUTIONS

1. SAFETY PRECAUTIONS

Personal Protective Equipment (PPE): Always wear safety goggles or face shield, hearing protection, heavy-duty gloves, and appropriate respiratory protection. For heavy-duty use, wear a full face shield and leather apron.

Kickback Hazard: Hold tool firmly with both hands. Do not stand directly behind the disc. Use the correct disc for the task. Maintain a secure stance .

Disc Safety: Inspect discs for damage before use. Use discs rated for grinder speed (12,000 rpm). Do not use damaged or cracked discs. Ensure the disc guard is correctly positioned between operator and disc. Use the protective guard for cutting when performing cut-off operations .

Electrical Safety: Use Residual Current Device (RCD). Do not operate in wet conditions or near water. Check power cord and extension cord for damage before use.

Fire Hazard: Sparks can ignite flammable materials. Clear work area. Do not use near flammable substances. Have a fire extinguisher readily available.

Dust Hazard: Some materials generate hazardous dust (silica from masonry, lead from old paint, chromium from stainless steel). Use local exhaust ventilation and appropriate respiratory protection (at least P2 or N95 mask).

Maintenance: Unplug tool before changing accessories or performing maintenance. Allow the tool to cool before storing.

Training requirement: Operators must be trained on correct usage, disc selection, and safety procedures. Supervisors should ensure all safety protocols are followed.

2. FIRST AID MEASURES

Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean, lukewarm water for at least 15 minutes, holding eyelids open. Seek medical attention.

Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Skin Contact (dust): Wash skin with soap and water. If irritation develops, seek medical attention.

Inhalation of Dust: Move a person to fresh air. If symptoms persist (coughing, difficulty breathing), seek medical attention.

Burn Injury (hot metal or disc): Immediately cool affected area with cool running water for at least 10 minutes. Cover with sterile dressing. Seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: Grinder is not flammable, but sparks generated during use can ignite flammable materials. Plastic casing may burn if exposed to fire.

Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools.

Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers; water may be used for general fires but not for electrical fires where live equipment is involved.

Bosch GWS 700 Professional Angle Grinder

Bosch GWS 700 Professional Angle Grinder

PRIMARY USES

1. Light Cutting and Grinding for Metal and Stone

2. Overload Capacity and Dust Protection

Primary Use: Features outstanding overload capacity suitable for tough jobs, combined with effective dust protection for long tool life.

SECONDARY USES

1. Surface Preparation: Removes rust and old coatings from metal surfaces.

2. Deburring: Smooths rough edges on metal workpieces.

3. Finishing: Prepares surfaces for welding or painting.

4. Concrete Grinding: Grinds and smooths concrete surfaces .

5. Wall Chasing: Creates channels in walls for pipes and cables .

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Angle grinder; not a medical device.

Designation: Bosch GWS 700 Professional

Order Numbers: 0.601.3A3.0K0 (115mm) , 0.601.3A3.1L0 (100mm) , 0.601.3A3.080 (100mm)

Rated Input Power: 710W

No-Load Speed: 12,000 rpm

Disc Diameter: 100mm, 115mm, and 125mm variants

Grinding Spindle Thread: M14 (115/125mm) or M10 (100mm)

Weight: 1.7kg

Protection Class: Double insulation

Country of Origin: Not specified

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Rotational cutting, grinding, and finishing via interchangeable discs.

Motor Type: Brushed motor with Service Minder Brush System

Overload Capacity: Outstanding for tough jobs

Dust Protection: Epoxy-coated housing and sealed switch mechanism

Noise/Vibration - Surface Grinding: Sound pressure 94 dB(A), sound power 102 dB(A), vibration 6.0 m/s²

Noise/Vibration - Cut-off Grinding: Vibration 6.5 m/s²

Disc Compatibility: Cutting discs, grinding wheels, flap discs, wire brushes, diamond cutting wheels

Restart Protection: Prevents uncontrolled starting after power interruption

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Ensure the disc guard is correctly fitted. Select the correct disc for the task. Check the disc for damage.

Usage Instructions: Allow tool to reach full speed before contacting the workpiece. Apply moderate pressure. Use the 2-position side auxiliary handle for comfortable operation .

Switch Type: Lockable Switch or Safety Switch depending on variant

Storage Conditions: Store in a dry, secure place.

Cleaning: Clean housing with soft, dry cloth. Keep air vents clear.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: High-speed rotating power tool; risk of injury from disc shattering, flying debris, and sparks. Eye protection, face shield, hearing protection, and heavy-duty gloves required.

Disc Safety: Ensure disc is rated for 12,000 rpm tool speed. M14 or M10 spindle thread.

Included Accessories: Protective guard, auxiliary handle, mounting flange, clamping nut

Regulatory: Complies with applicable safety standards.

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a dry, secure place.

Inspection: Regularly inspect tools, discs, and accessories for damage. Check carbon brushes and replace when worn (Service Minder system stops tool when maintenance is required) .

Usage: Always unplug before changing discs or performing maintenance.

1. SAFETY PRECAUTIONS

Personal Protective Equipment (PPE): Always wear safety goggles or face shield, hearing protection, heavy-duty gloves, and appropriate respiratory protection. For heavy-duty use, wear a full face shield and leather apron.

Kickback Hazard: Hold tool firmly with both hands. Do not stand directly behind the disc. Use the correct disc for the task. Maintain a secure stance .

Disc Safety: Inspect discs for damage before use. Use discs rated for grinder speed (12,000 rpm). Do not use damaged or cracked discs. Ensure the disc guard is correctly positioned between operator and disc. Use the protective guard for cutting when performing cut-off operations .

Electrical Safety: Use Residual Current Device (RCD). Do not operate in wet conditions or near water. Check power cord and extension cord for damage before use.

Fire Hazard: Sparks can ignite flammable materials. Clear work area. Do not use near flammable substances. Have a fire extinguisher readily available.

Dust Hazard: Some materials generate hazardous dust (silica from masonry, lead from old paint, chromium from stainless steel). Use local exhaust ventilation and appropriate respiratory protection (at least P2 or N95 mask).

Maintenance: Unplug tool before changing accessories or performing maintenance. Allow the tool to cool before storing.

Training requirement: Operators must be trained on correct usage, disc selection, and safety procedures. Supervisors should ensure all safety protocols are followed.

2. FIRST AID MEASURES

Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean, lukewarm water for at least 15 minutes, holding eyelids open. Seek medical attention.

Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Skin Contact (dust): Wash skin with soap and water. If irritation develops, seek medical attention.

Inhalation of Dust: Move a person to fresh air. If symptoms persist (coughing, difficulty breathing), seek medical attention.

Burn Injury (hot metal or disc): Immediately cool affected area with cool running water for at least 10 minutes. Cover with sterile dressing. Seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: Grinder is not flammable, but sparks generated during use can ignite flammable materials. Plastic casing may burn if exposed to fire.

Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools.

Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers; water may be used for general fires but not for electrical fires where live equipment is involved.

Related products

BRANDS

FOLLOW US