MaxMech Circular Saw

WhatsApp Order

The Maxmech Circular Saw CS 1400-185 is a 1400W electric circular saw with a 185mm blade, designed for fast, precise cutting of wood, plywood, and other sheet materials used in construction and maintenance. It features a 63mm cutting depth at 90°, 55° bevel capacity with positive stops, a laser guide (on select models), and a parallel guide (rip fence) for straight, accurate cuts . The ergonomic handle and lightweight design ensure comfortable and controlled operation. Suitable for installing shelving, flooring, partition walls, and a wide range of maintenance tasks.

Categories: POWER TOOLS, Saws (Circular, Jigsaw, Reciprocating) Tags: 1400W Circular Saw, 185mm Circular Saw, circular saw, Construction, Facilities Management, Healthcare Facilities, Maintenance, Maxmech CS 1400-185, Plywood Cutting, power tool, Saw, Wood Cutting

Description

Table of Contents

MaxMech Circular Saw

PRIMARY USES

1. Precision Cutting of Wood and Sheet Materials for Construction and Maintenance
Primary Use: A powerful electric circular saw (1400W, 185mm blade) designed for fast, straight, and precise cutting of wood, plywood, MDF, chipboard, and other sheet materials used in construction, furniture making, and facility maintenance within healthcare settings.
How it helps: For the maintenance team, carpenter, and facilities manager, the 1400W motor delivers high torque for cutting through thick or dense materials with ease, making it ideal for installing shelving, workbenches, partition walls, and custom cabinetry. The 185mm blade provides a maximum cutting depth of approximately 63mm at 90°, sufficient for standard 2×4 and 2×6 lumber . The 55° bevel capacity with positive stops at 45° ensures clean, accurate bevel cuts for trims and angled joints. The ergonomic handle and lightweight design (approximately 5.5-6.0kg) enable comfortable, controlled operation, reducing user fatigue during extended cutting tasks.

2. Installation and Maintenance of Healthcare Infrastructure
Primary Use: Used for cutting timber, MDF, and other sheet materials to size when installing or repairing infrastructure in healthcare settings, including building temporary partitions, installing new flooring, and constructing custom fittings.
How it helps: The saw’s depth adjustment allows the blade to be set to the precise depth required, reducing waste and ensuring a clean, accurate cut. The included parallel guide (rip fence) ensures straight and accurate cuts, which is essential for professional results in construction and renovation . The standard 185mm blade size means blades are readily available, allowing for easy replacement and the use of specialised blades for different materials.

MaxMech Circular Saw Amaris Hardware Solutions

SECONDARY USES

1. Cutting Sheet Materials: Perfect for cutting large sheets of plywood, MDF, particleboard, and hardboard for shelving, cabinetry, and other construction projects. A guide rail or straightedge should be used to ensure accurate cuts.

2. Cutting Plastic and Composite Materials: With the appropriate blade, the saw can be used to cut PVC, acrylic, and other composite materials for various building and maintenance projects.

3. Cutting Metal (with appropriate blade): With the correct metal-cutting blade, the circular saw can be used to cut thin metal sheets, roofing, and metal profiles, although a dedicated metal-cutting saw is recommended for heavy-duty use.

KEY PRODUCT FEATURES

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Portable electric circular saw; not a medical device
Designation: Maxmech Circular Saw CS 1400-185
Motor Power: 1400W
Blade Diameter: 185mm (7 ¼ inches)
Blade Bore: 20mm or 30mm (check specific model)
Max. Cutting Depth (90°): 63mm (approx. 2.5 inches)
Max. Cutting Depth (45°): 45-46mm
Bevel Capacity: 55° with positive stops at 45°
No-Load Speed: 5,500-5,700 RPM
Power Supply: 220-240V AC, 50Hz (standard for Kenya)
Country of Origin: China
Manufacturer: Maxmech

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: High-speed rotational cutting via a circular toothed blade
Blade Guard: Retractable lower guard for safety; spring-loaded to return automatically
Depth Adjustment: Quick-release lever for accurate depth setting
Bevel Adjustment: Tiltable base plate for bevel cuts up to 55°
Guide Features: Parallel guide (rip fence) for straight cuts; laser guide (select models) for cutting accuracy
Safety Features: Overload protection; soft-start motor; double insulation
Laser Guide: Some models feature a laser guide for straight-line cutting
Dust Extraction: Port for connecting a dust extractor or vacuum (select models)
Lock-On Button: For continuous operation

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Check that the blade is correctly fitted, tightened, and appropriate for the material. Set the cutting depth so the blade protrudes just below the material. Wear appropriate PPE.
Usage Instructions: Mark the cutting line. Use the parallel guide or a straightedge for accurate cuts. Place the saw base flat on the material. Start the saw, allow it to reach full speed, and push forward steadily. Do not force the saw; let the blade do the work.
Storage Conditions: Store in a dry, secure place. Keep blades in a dry environment to prevent rust.
Ventilation: Motor cooling relies on airflow; ensure vents are not blocked.
Precautions: Always wear eye protection and hearing protection. Use a dust mask when cutting wood. Secure the workpiece. Wait for the blade to stop before removing it from the cut. Do not use the saw without the blade guard in place.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: High-speed rotating power tool; risk of serious injury from contact with the blade, kickback, and flying debris.
Kickback Hazard: Sudden reaction to a pinched or stalled blade; maintain a firm grip and proper stance; use the riving knife and anti-kickback pawls (where fitted).
Blade Guard: Must always be in place and functioning correctly.
Eye Protection: Mandatory.
Hearing Protection: Mandatory due to high noise levels.
Respiratory Protection: Essential when cutting wood to avoid sawdust inhalation.
Electrical Safety: Use a Residual Current Device (RCD); do not use in wet conditions.
Dust Hazard: Wood dust can be harmful; use dust extraction or respiratory protection.
Regulatory: Complies with applicable safety standards.

SAFETY HANDLING PRECAUTIONS

1. SAFETY PRECAUTIONS

Blade Safety: Never use a damaged or incorrectly sharpened blade. Always check the blade guard for the correct function. Wait for the blade to stop completely before removing it from the cut.
Kickback Prevention: Hold the saw firmly with both hands. Use a riving knife and anti-kickback pawls (if fitted). Do not start the saw with the blade in contact with the workpiece. Use a guide for long cuts.
Eye and Hearing Protection: Safety goggles and hearing protection are mandatory.
Respiratory Protection: A dust mask or respirator should be worn when cutting wood to avoid inhaling sawdust.
Electrical Safety: Use an RCD. Do not use it in wet conditions or near water.
Personal Protective Equipment (PPE): Always wear safety goggles, hearing protection, heavy-duty gloves, and appropriate respiratory protection.
Keep out of reach of children: Store in a secure location.

2. FIRST AID MEASURES

Cut Injury: Apply direct pressure to stop bleeding. Clean the wound. Cover with a sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.
Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean, lukewarm water for at least 15 minutes. Seek medical attention.
Inhalation of Sawdust: Move person to fresh air. If symptoms persist, seek medical attention.
Electric Shock: Turn off the power supply immediately. If the person is not breathing, begin CPR and call emergency services. Do not touch the person until the power supply has been disconnected.

3. FIRE FIGHTING MEASURES

Flammability: The saw is not flammable, but sawdust and other debris generated during use can be combustible. The plastic casing may burn.
Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving the tool.
Fire Response: In the event of a fire, evacuate the area and call emergency services.

MaxMech Circular Saw

MaxMech Circular Saw

PRIMARY USES

SECONDARY USES

1. Cutting Sheet Materials: Perfect for cutting large sheets of plywood, MDF, particleboard, and hardboard for shelving, cabinetry, and other construction projects. A guide rail or straightedge should be used to ensure accurate cuts.

2. Cutting Plastic and Composite Materials: With the appropriate blade, the saw can be used to cut PVC, acrylic, and other composite materials for various building and maintenance projects.

3. Cutting Metal (with appropriate blade): With the correct metal-cutting blade, the circular saw can be used to cut thin metal sheets, roofing, and metal profiles, although a dedicated metal-cutting saw is recommended for heavy-duty use.

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Portable electric circular saw; not a medical device

Designation: Maxmech Circular Saw CS 1400-185

Motor Power: 1400W

Blade Diameter: 185mm (7 ¼ inches)

Blade Bore: 20mm or 30mm (check specific model)

Max. Cutting Depth (90°): 63mm (approx. 2.5 inches)

Max. Cutting Depth (45°): 45-46mm

Bevel Capacity: 55° with positive stops at 45°

No-Load Speed: 5,500-5,700 RPM

Power Supply: 220-240V AC, 50Hz (standard for Kenya)

Country of Origin: China

Manufacturer: Maxmech

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: High-speed rotational cutting via a circular toothed blade

Blade Guard: Retractable lower guard for safety; spring-loaded to return automatically

Depth Adjustment: Quick-release lever for accurate depth setting

Bevel Adjustment: Tiltable base plate for bevel cuts up to 55°

Guide Features: Parallel guide (rip fence) for straight cuts; laser guide (select models) for cutting accuracy

Safety Features: Overload protection; soft-start motor; double insulation

Laser Guide: Some models feature a laser guide for straight-line cutting

Dust Extraction: Port for connecting a dust extractor or vacuum (select models)

Lock-On Button: For continuous operation

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Check that the blade is correctly fitted, tightened, and appropriate for the material. Set the cutting depth so the blade protrudes just below the material. Wear appropriate PPE.

Usage Instructions: Mark the cutting line. Use the parallel guide or a straightedge for accurate cuts. Place the saw base flat on the material. Start the saw, allow it to reach full speed, and push forward steadily. Do not force the saw; let the blade do the work.

Storage Conditions: Store in a dry, secure place. Keep blades in a dry environment to prevent rust.

Ventilation: Motor cooling relies on airflow; ensure vents are not blocked.

Precautions: Always wear eye protection and hearing protection. Use a dust mask when cutting wood. Secure the workpiece. Wait for the blade to stop before removing it from the cut. Do not use the saw without the blade guard in place.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: High-speed rotating power tool; risk of serious injury from contact with the blade, kickback, and flying debris.

Kickback Hazard: Sudden reaction to a pinched or stalled blade; maintain a firm grip and proper stance; use the riving knife and anti-kickback pawls (where fitted).

Blade Guard: Must always be in place and functioning correctly.

Eye Protection: Mandatory.

Hearing Protection: Mandatory due to high noise levels.

Respiratory Protection: Essential when cutting wood to avoid sawdust inhalation.

Electrical Safety: Use a Residual Current Device (RCD); do not use in wet conditions.

Dust Hazard: Wood dust can be harmful; use dust extraction or respiratory protection.

Regulatory: Complies with applicable safety standards.

1. SAFETY PRECAUTIONS

Blade Safety: Never use a damaged or incorrectly sharpened blade. Always check the blade guard for the correct function. Wait for the blade to stop completely before removing it from the cut.

Kickback Prevention: Hold the saw firmly with both hands. Use a riving knife and anti-kickback pawls (if fitted). Do not start the saw with the blade in contact with the workpiece. Use a guide for long cuts.

Eye and Hearing Protection: Safety goggles and hearing protection are mandatory.

Respiratory Protection: A dust mask or respirator should be worn when cutting wood to avoid inhaling sawdust.

Electrical Safety: Use an RCD. Do not use it in wet conditions or near water.

Personal Protective Equipment (PPE): Always wear safety goggles, hearing protection, heavy-duty gloves, and appropriate respiratory protection.

Keep out of reach of children: Store in a secure location.

2. FIRST AID MEASURES

Cut Injury: Apply direct pressure to stop bleeding. Clean the wound. Cover with a sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean, lukewarm water for at least 15 minutes. Seek medical attention.

Inhalation of Sawdust: Move person to fresh air. If symptoms persist, seek medical attention.

Electric Shock: Turn off the power supply immediately. If the person is not breathing, begin CPR and call emergency services. Do not touch the person until the power supply has been disconnected.

3. FIRE FIGHTING MEASURES

Flammability: The saw is not flammable, but sawdust and other debris generated during use can be combustible. The plastic casing may burn.

Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving the tool.

Fire Response: In the event of a fire, evacuate the area and call emergency services.

Related products

BRANDS

FOLLOW US