Bosch Auger Bit Hexagon
Click to enlarge
Bosch Brad Point 7-Piece Wood Drill Bit Set Amaris Hardware Solutions
Bosch Brad Point Drill Bits
Back to products
Bosch Extra Hard PH2 Screwdriver Bit
Bosch Extra Hard PH2 Screwdriver Bit
Bosch

Bosch Auger Bit Hexagon

WhatsApp Order
The Bosch Auger Bit Hexagon features a hexagon shank for secure grip in drill chucks, screw tip for effortless drilling with minimal pressure, and large flute design for efficient chip removal. Available in individual sizes: 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, and 30mm. All bits have 360mm working length, 450mm total length, and d11.1mm shank diameter. Suitable for electricians, plumbers, carpenters, and timber framers for deep, accurate boring in wood. Order numbers: 2608597644 (16mm), 2608597645 (18mm), 2608597646 (20mm), 2608597647 (22mm), 2608597648 (24mm), 2608597649 (26mm), 2608597650 (28mm), 2608597651 (30mm).
Compare
Add to wishlist
Categories: , , Tags: , , , , , , , , , , ,
Description

Table of Contents

Bosch Auger Bit Hexagon

PRIMARY USES

1. Deep Hole Boring in Timber for Heavy-Duty Construction
Primary Use: A range of auger bits (Hexagon shank, 360mm length, 450mm total length, d11.1mm shank diameter) used for deep, accurate boring in timber. Essential for heavy-duty construction, timber framing, and electrical/plumbing installations requiring long, straight holes through thick wood.
How it helps: For electricians, plumbers, carpenters, and timber framers, the auger bits provide fast, accurate deep-hole drilling through timber. The hexagonal shank provides excellent grip in drill chucks, ensuring maximum torque transfer without slippage. The screw tip pulls the bit into the wood, enabling effortless drilling with minimal pressure. The large flute design efficiently removes wood chips from deep holes, preventing clogging and overheating. The full range from 16mm to 30mm covers all common sizes for cable and pipe runs through timber structures.
2. Electrical and Plumbing Installations
Primary Use: Drills long, straight holes through timber joists, beams, and structural members for routing cables and pipes.
How it helps: The 360mm working length allows drilling through multiple layers of timber or thick structural beams in a single pass. The 450mm total length provides depth for deep holes in thick timber members. The screw tip ensures fast penetration, while the efficient chip removal prevents clogging during deep drilling. The range of sizes accommodates various cable diameters and pipe sizes, making it ideal for installation work in new construction and renovation projects.
3. Timber Framing and Heavy Construction
Primary Use: Bores deep holes in structural timber for bolted connections, dowel joints, and timber frame construction.
How it helps: The auger design delivers long, straight holes with clean entry points, essential for structural connections. The hexagon shank provides secure power transfer, preventing bit slippage during heavy-duty drilling. The screw tip pulls the bit through the timber, reducing operator fatigue during repetitive drilling tasks.

SECONDARY USES

1. Log Cabin Construction: Drills holes for dowels and connections in log building.
2. Fencing and Decking: Bores holes for structural connections in outdoor timber construction.
3. Bridge and Pier Construction: Drills through heavy timber members for bolted connections.
4. Renovation Work: Drills through timber studs and joists for retrofitting services.
About brand
**Bosch** is a leading German brand founded in **1886**, renowned for its high-quality, innovative, and reliable engineering solutions. In the hardware industry, Bosch is best known for its durable power tools, measuring equipment, and accessories, trusted by professionals and DIY users worldwide. With a strong focus on performance, precision, and innovation, Bosch continues to set the standard for quality in construction, manufacturing, and home improvement.
KEY PRODUCT FEATURES

1. BASIC IDENTIFICATION ATTRIBUTES

  • Device Type: Wood drill bit; not a medical device.
  • Designation: Bosch Auger Bit Hexagon
  • Shank Type: Hexagon
  • Shank Diameter: d11.1mm
  • Working Length: 360mm
  • Total Length: 450mm
  • Country of Origin: China
INDIVIDUAL BITS SPECIFICATIONS
Order Number
Size
Working Length
Total Length
Shank Diameter
2608597644
16mm
360mm
450mm
d11.1mm
2608597645
18mm
360mm
450mm
d11.1mm
2608597646
20mm
360mm
450mm
d11.1mm
2608597647
22mm
360mm
450mm
d11.1mm
2608597648
24mm
360mm
450mm
d11.1mm
2608597649
26mm
360mm
450mm
d11.1mm
2608597650
28mm
360mm
450mm
d11.1mm
2608597651
30mm
360mm
450mm
d11.1mm

2. TECHNICAL & PERFORMANCE PROPERTIES

  • Primary Action: Deep hole boring in timber via screw tip and large flute design.
  • Tip Design: Screw tip for effortless pulling into wood
  • Flute Design: Large flute for efficient chip removal
  • Shank: Hexagonal for secure grip and maximum torque transfer
  • Sizes: 16mm to 30mm
  • Application: Wood only (not suitable for concrete, metal, or masonry)
  • Benefits: Deep drilling, clean holes, fast chip removal

3. PHYSICAL & OPERATIONAL PROPERTIES

  • Preparation: Select appropriate bit size for the task. Insert the bit into the drill chuck and tighten securely. Use a powerful drill (minimum 850W recommended for larger sizes).
  • Usage Instructions: Position the bit at the drilling point. Allow the screw tip to pull the bit into the wood. Apply steady pressure and maintain a straight angle. The large flutes will remove wood chips efficiently.
  • Storage Conditions: Store in a dry place. Keep bits in the provided case or organiser to prevent damage.
  • Cleaning: Clean bits after use with a soft cloth. Remove wood residue from flutes.

4. SAFETY & COMPLIANCE ATTRIBUTES

  • Safety Classification: Wood drill bit; no laser or electrical hazards. No special safety precautions required beyond normal use.
  • Material Safety: High-quality steel construction
  • Regulatory: Complies with relevant safety standards.

5. STORAGE & HANDLING ATTRIBUTES

  • Storage: Store in a dry, secure place. Keep bits in the provided case or organiser to prevent damage and maintain sharpness.
  • Inspection: Regularly inspect bits for damage or wear. Replace dull or damaged bits to ensure clean drilling.
  • Usage: Do not use on concrete, metal, or masonry. Use only for wood and wood-based materials. Use with powerful drills only.
SAFETY HANDLING PRECAUTIONS

1. SAFETY PRECAUTIONS

Operational Safety: Always wear safety glasses when drilling. Secure the workpiece firmly before drilling to prevent spinning. Do not wear loose clothing or gloves that could become entangled in the drill. Use both hands on the drill for large diameter bits.
Tool Safety: Ensure the bit is securely tightened in the chuck before use. Use a powerful drill (minimum 850W for large sizes). Do not force the bit; allow the screw tip to pull it through. Allow the bit to cool between uses.
Maintenance: Clean bits after use. Remove wood residue from flutes. Do not use aggressive cleaning agents. Store in a dry place to prevent rust. Oil lightly to prevent corrosion.
Training requirement: Basic instruction on drill operation and bit selection is recommended. Users should understand the power requirements for large diameter auger bits.

2. FIRST AID MEASURES

Eye Exposure (dust/debris): Rinse immediately with plenty of clean water for at least 15 minutes. Seek medical attention if irritation persists.
Skin Contact: Wash with soap and water.
Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.
Inhalation: Move to fresh air. If symptoms persist, seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: The bits themselves are not flammable. Packaging may burn if exposed to fire.
Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools and packaging.
Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers.

Related products

Big Battery Pro Amaris Hardware
-5%
Compare

Big Battery Pro

Original price was: $ 50.00.Current price is: $ 47.50.

A " Big Battery Pro" typically refers to a rechargeable lithium-ion battery with a nominal voltage of 20 volts. The nominal voltage represents the average voltage output over the majority of the battery's discharge cycle. It's important to note that the actual voltage during use may fluctuate within a specified range.

These batteries are commonly used to power various devices, including power tools, garden equipment, and other portable electronic devices. The "20V" designation is a standardized measure indicating the electrical potential of the battery, providing a general indication of its power output.

Keep in mind that when considering a 20V battery, it's essential to verify compatibility with the specific device or tool it is intended for. Additionally, different manufacturers may have variations in the actual voltage, capacity, and features of their 20V battery products. Checking the product documentation or contacting the manufacturer for detailed specifications is recommended for accurate information.

Add to wishlist
Add to cart
Quick view
Chain Saw Adapter for Angle Grinder Amaris Hardware
-5%
Compare

Chain Saw Adapter for Angle Grinder

Original price was: $ 25.77.Current price is: $ 24.48.

Chain Saw Adapter for Angle Grinder typically refer to components that allow you to attach or use certain accessories with your chainsaw or grinder.

  1. Chainsaw Adapter:
    • A device that enables the use of a 12-inch chainsaw blade on a chainsaw designed for a different blade size. This adapter allows you to customize or replace the original chainsaw blade with a 12-inch one, potentially for different cutting applications.
  2. Grinder Adapter:
    • An accessory that allows you to attach a grinder to a 12-inch chainsaw, converting it into a chainsaw chain sharpener. This adapter facilitates the grinding or sharpening of the chainsaw chain, ensuring optimal cutting performance.
Add to wishlist
Add to cart
Quick view
Chuck Die Grinder Amaris Hardware
-5%
Compare

Chuck Die Grinder

Original price was: $ 30.77.Current price is: $ 29.23.

A Chuck Die Grinder is a handheld power tool equipped with a collet or chuck that holds a rotary burr or abrasive head. This tool is commonly used for precision grinding, polishing, and shaping of metal, wood, plastic, and other materials. Chuck Die Grinders are versatile and compact, allowing for intricate and detailed work in various applications, including metalworking, woodworking, and fabrication. They are widely employed in industries such as machining, automotive, and aerospace, as well as by hobbyists and craftsmen for tasks requiring fine control and high-speed material removal.

Add to wishlist
Add to cart
Quick view
Circular Saw Amaris Hardware
-5%
Compare

Circular Saw

Original price was: $ 107.69.Current price is: $ 102.31.

A circular saw is a power tool equipped with a rotating circular blade, typically with teeth along its edge, designed for cutting various materials such as wood, plastic, metal, or masonry. It is commonly used in carpentry, construction, and other applications to make straight or beveled cuts with precision and efficiency. The circular saw is versatile and can be handheld or mounted on a table or other stationary surface, depending on the specific model and intended use.

Add to wishlist
Add to cart
Quick view
Countersink Drill Set Amaris Hardware
-5%
Compare

Countersink Drill Set

Original price was: $ 26.54.Current price is: $ 25.21.

A countersink drill set typically refers to a collection of six tools designed for countersinking operations in woodworking or metalworking. Each set usually includes six individual countersink drills with varying sizes or angles. Countersinking is a process that involves creating a conical hole in a material, allowing the head of a screw or bolt to sit flush with or below the surface. These drill sets are essential for achieving a professional finish in various applications where a smooth and even surface is desired, such as in carpentry, metal fabrication, or DIY projects.

Add to wishlist
Add to cart
Quick view
Forstner Bit Set Amaris Hardware
-5%
Compare

Forstner Bit Set

Original price was: $ 35.77.Current price is: $ 33.98.

A Forstner bit set typically refers to a collection of five Forstner drill bits designed for woodworking applications. Forstner bits are specialized cutting tools used to bore flat-bottomed holes with clean and precise edges in wood. The set usually includes five bits with varying diameters, allowing users to choose the appropriate size for different projects. These bits often feature a center point for accurate positioning, two sharp outer cutting edges, and a cylindrical shape. The set is versatile and suitable for tasks like drilling holes for dowels, creating pocket holes, or countersinking screws in woodworking projects.

Add to wishlist
Add to cart
Quick view
Forstner Drill Bits Amaris Hardware (1)
-5%
Compare

Forstner Drill Bits

Original price was: $ 14.62.Current price is: $ 13.89.

A Forstner drill bit is a specialized cutting tool used in woodworking to create flat-bottomed holes with smooth sides. Unlike traditional twist or spade drill bits, Forstner bits are characterized by a cylindrical shape with a flat bottom and a rim that cuts the perimeter of the hole. These bits are well-suited for precision drilling tasks, such as creating boreholes for dowels or hinge cups, as they produce clean and accurate results, minimizing tear-out and splintering in the wood. Forstner drill bits are commonly used in cabinetry, furniture making, and other woodworking applications where precise and clean hole drilling is essential.

Add to wishlist
Add to cart
Quick view
Glass Drill Set Straight Handle Amaris Hardware
-5%
Compare

Glass Drill Set Straight Handle

Original price was: $ 19.04.Current price is: $ 18.09.

A Glass Drill Set Straight Handle refers to a set of five drill bits specifically designed for drilling into glass surfaces. Each drill bit in the set typically has a straight handle, making it easier to grip and control during the drilling process. These drill bits are crafted with materials and designs that enhance their ability to cut through glass without causing cracks or shattering. The set may include a variety of drill bit sizes to accommodate different drilling needs and applications on glass surfaces.

Add to wishlist
Add to cart
Quick view