Bosch GSA 120 Professional Reciprocating Saw

Bosch GSA 120 Professional Reciprocating Saw

WhatsApp Order

The Bosch GSA 120 Professional Reciprocating Saw features a powerful 1,200W motor, 0-3,000 spm no-load stroke rate, and 29mm stroke length. It delivers a cutting depth of 220mm in wood, 220mm in metal profiles and pipes, and 20mm in steel plate. The SDS blade change system enables quick, tool-free blade changes . The ergonomic handle with soft and hard materials ensures a comfortable grip in any position. Weight: 3.7kg, cable length: 2.65m . Suitable for plumbers, electricians, demolition crews, and general contractors. Order number: 06016B1020.

Compare

Add to wishlist

Categories: Saws (Circular, Jigsaw, Reciprocating), POWER TOOLS Tags: 1200W Reciprocating Saw, Bosch GSA 120, Bosch Professional, construction tool, Corded Reciprocating Saw, cutting tool, demolition saw, demolition tool, electrician tool, Pipe Saw, Plumber Tool, reciprocating saw, Sabre Saw

Description

Table of Contents

Bosch GSA 120 Professional Reciprocating Saw

PRIMARY USES

1. Heavy-Duty Demolition and Cutting for Construction and Renovation

Primary Use: A powerful reciprocating saw (1,200W motor, 0-3,000 spm) used for cutting through wood, metal, and plastic in demolition, renovation, and construction applications. Essential for plumbers, electricians, demolition crews, and general contractors requiring versatile cutting in confined spaces.

How it helps: For plumbers, electricians, and demolition professionals, the reciprocating saw delivers effortless cutting with its 1,200W motor, the most powerful in its class. The 29mm stroke length enables fast, aggressive cutting through various materials while maintaining precision. The SDS blade change system allows for quick, tool-free blade changes, minimising downtime on the job site. The combination of soft and hard materials in the handle ensures a comfortable grip in any position, allowing extended use without discomfort.

2. Pipe and Conduit Cutting

Primary Use: Cuts through metal pipes, profiles, and conduits in plumbing and electrical installations.

How it helps: The saw delivers a cutting depth of 220mm in metal profiles and pipes, making it ideal for cutting plumbing pipes, electrical conduits, and metal studs. The low-friction transmission system and optimised motor heat release extend durability, ensuring reliable performance in demanding applications.

SECONDARY USES

1. Wood Cutting: Cuts through timber, lumber, and wood-based materials with a maximum cutting depth of 220mm.

2. Metal Cutting: Cuts through steel plate up to 20mm thick.

3. Demolition Work: Ideal for demolition tasks requiring cutting through multiple materials in confined spaces.

4. Renovation Projects: Versatile cutting tool for various renovation applications.

About brand

**Bosch** is a leading German brand founded in **1886**, renowned for its high-quality, innovative, and reliable engineering solutions. In the hardware industry, Bosch is best known for its durable power tools, measuring equipment, and accessories, trusted by professionals and DIY users worldwide. With a strong focus on performance, precision, and innovation, Bosch continues to set the standard for quality in construction, manufacturing, and home improvement.

KEY PRODUCT FEATURES

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Reciprocating saw; not a medical device.
Designation: Bosch GSA 120 Professional
Order Number: 0 601 6B1 0F0 / 06016B1020
Rated Input Power: 1,200W
No-Load Stroke Rate: 0-3,000 spm
Stroke Length: 29mm
Weight: 3.7kg
Cable Length: 2.65m
Tool Dimensions: 96 x 475 x 165mm

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Reciprocating sawing via SDS blade system.
Motor Type: Powerful 1,200W motor
Transmission: Low-friction for extended durability
Blade Change: SDS system for quick, tool-free changes
Cutting Depth in Wood: 220mm
Cutting Depth in Steel Plate: 20mm
Cutting Depth in Metal Profiles/Pipes: 220mm
Vibration Emission (Sawing Wood): 18 m/s²
Sound Pressure Level: 88.5 dB(A)
Sound Power Level: 99.5 dB(A)
Protection Class: / II

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Select appropriate saw blade for the material. Insert the blade using the SDS lever .
Usage Instructions: Press the on/off switch to start. Stroke rate is variably controlled by switch pressure . To lock the switch on, press the locking mechanism . For prolonged low-speed use, run at maximum speed for 3 minutes to cool down .
Stroke Rate Control: Variable via switch pressure
Blade Compatibility: 1/2" universal shank, shank thickness 0.8-1.8mm
Storage Conditions: Store in a dry, secure place.
Cleaning: Clean housing with soft, dry cloth.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: Power tool; risk of injury from moving parts, sharp blades, and flying debris. Eye protection, hearing protection, and gloves required.
Dust Hazard: Sawing materials can generate hazardous dust—use respiratory protection and dust extraction .
Electrical Safety: Check power cord for damage before use. Use RCD with 30mA or less in AUS/NZ .
Regulatory: Complies with applicable safety standards.
Country of Origin: Made in India .

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a dry, secure place.
Inspection: Regularly inspect blades for damage or wear. Check power cord before use.
Usage: Always unplug before changing blades or performing maintenance.
Blade Handling: Wear protective gloves when changing blades—blades are sharp and can become hot .

SAFETY HANDLING PRECAUTIONS

1. SAFETY PRECAUTIONS

Personal Protective Equipment (PPE): Always wear safety goggles, hearing protection, and heavy-duty gloves. Use appropriate respiratory protection when cutting materials that generate dust .

Electrical Safety: Check power cord and extension cord for damage before use. Do not operate in wet conditions.

Dust Hazard: Some materials generate hazardous dust. Use appropriate respiratory protection (at least P2 or N95 mask) and dust extraction .

Kickback Hazard: Maintain firm grip and proper stance. Do not apply excessive pressure—allow the tool to do the work.

Blade Safety: Let the saw blade cool down before removing it—there is a risk of injury when touching hot blades . Ensure the blade is securely seated by pulling it after insertion .

Maintenance: Unplug tool before changing blades or performing maintenance. Allow the tool to cool before storing.

Training requirement: Operators should be familiar with correct usage, blade selection, and safety procedures. Supervisors should ensure all safety protocols are followed.

2. FIRST AID MEASURES

Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean water for at least 15 minutes, holding eyelids open. Seek medical attention.

Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Skin Contact (dust): Wash skin with soap and water. If irritation develops, seek medical attention.

Inhalation of Dust: Move a person to fresh air. If symptoms persist (coughing, difficulty breathing), seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: The tool is not flammable, but plastic casing may burn if exposed to fire. Sparks generated during cutting can ignite flammable materials.

Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools.

Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers; water may be used for general fires but not for electrical fires where live equipment is involved.

Bosch GSA 120 Professional Reciprocating Saw

Bosch GSA 120 Professional Reciprocating Saw

PRIMARY USES

1. Heavy-Duty Demolition and Cutting for Construction and Renovation

2. Pipe and Conduit Cutting

Primary Use: Cuts through metal pipes, profiles, and conduits in plumbing and electrical installations.

SECONDARY USES

1. Wood Cutting: Cuts through timber, lumber, and wood-based materials with a maximum cutting depth of 220mm.

2. Metal Cutting: Cuts through steel plate up to 20mm thick.

3. Demolition Work: Ideal for demolition tasks requiring cutting through multiple materials in confined spaces.

4. Renovation Projects: Versatile cutting tool for various renovation applications.

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Reciprocating saw; not a medical device.

Designation: Bosch GSA 120 Professional

Order Number: 0 601 6B1 0F0 / 06016B1020

Rated Input Power: 1,200W

No-Load Stroke Rate: 0-3,000 spm

Stroke Length: 29mm

Weight: 3.7kg

Cable Length: 2.65m

Tool Dimensions: 96 x 475 x 165mm

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Reciprocating sawing via SDS blade system.

Motor Type: Powerful 1,200W motor

Transmission: Low-friction for extended durability

Blade Change: SDS system for quick, tool-free changes

Cutting Depth in Wood: 220mm

Cutting Depth in Steel Plate: 20mm

Cutting Depth in Metal Profiles/Pipes: 220mm

Vibration Emission (Sawing Wood): 18 m/s²

Sound Pressure Level: 88.5 dB(A)

Sound Power Level: 99.5 dB(A)

Protection Class: / II

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Select appropriate saw blade for the material. Insert the blade using the SDS lever .

Usage Instructions: Press the on/off switch to start. Stroke rate is variably controlled by switch pressure . To lock the switch on, press the locking mechanism . For prolonged low-speed use, run at maximum speed for 3 minutes to cool down .

Stroke Rate Control: Variable via switch pressure

Blade Compatibility: 1/2" universal shank, shank thickness 0.8-1.8mm

Storage Conditions: Store in a dry, secure place.

Cleaning: Clean housing with soft, dry cloth.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: Power tool; risk of injury from moving parts, sharp blades, and flying debris. Eye protection, hearing protection, and gloves required.

Dust Hazard: Sawing materials can generate hazardous dust—use respiratory protection and dust extraction .

Electrical Safety: Check power cord for damage before use. Use RCD with 30mA or less in AUS/NZ .

Regulatory: Complies with applicable safety standards.

Country of Origin: Made in India .

5. STORAGE & HANDLING ATTRIBUTES

Storage: Store in a dry, secure place.

Inspection: Regularly inspect blades for damage or wear. Check power cord before use.

Usage: Always unplug before changing blades or performing maintenance.

Blade Handling: Wear protective gloves when changing blades—blades are sharp and can become hot .

1. SAFETY PRECAUTIONS

Personal Protective Equipment (PPE): Always wear safety goggles, hearing protection, and heavy-duty gloves. Use appropriate respiratory protection when cutting materials that generate dust .

Electrical Safety: Check power cord and extension cord for damage before use. Do not operate in wet conditions.

Dust Hazard: Some materials generate hazardous dust. Use appropriate respiratory protection (at least P2 or N95 mask) and dust extraction .

Kickback Hazard: Maintain firm grip and proper stance. Do not apply excessive pressure—allow the tool to do the work.

Blade Safety: Let the saw blade cool down before removing it—there is a risk of injury when touching hot blades . Ensure the blade is securely seated by pulling it after insertion .

Maintenance: Unplug tool before changing blades or performing maintenance. Allow the tool to cool before storing.

Training requirement: Operators should be familiar with correct usage, blade selection, and safety procedures. Supervisors should ensure all safety protocols are followed.

2. FIRST AID MEASURES

Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean water for at least 15 minutes, holding eyelids open. Seek medical attention.

Cut Injury: Apply direct pressure to stop bleeding. Clean wound with clean water. Cover with sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Skin Contact (dust): Wash skin with soap and water. If irritation develops, seek medical attention.

Inhalation of Dust: Move a person to fresh air. If symptoms persist (coughing, difficulty breathing), seek medical attention.

3. FIRE FIGHTING MEASURES

Flammability: The tool is not flammable, but plastic casing may burn if exposed to fire. Sparks generated during cutting can ignite flammable materials.

Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving tools.

Fire Response: In event of fire, evacuate the area and call emergency services. Use appropriate extinguishers; water may be used for general fires but not for electrical fires where live equipment is involved.

Related products

BRANDS

FOLLOW US