Max Mech Electric Drill

WhatsApp Order

The Maxmech Electric Drill is a 500W electric power tool with a 10mm keyed or keyless chuck, variable speed control (0-2800 RPM), and forward/reverse functionality. It is ideal for drilling holes in wood, metal, and other materials, and for driving and removing screws in equipment assembly, furniture installation, and general building maintenance. The compact and lightweight design (1.2kg) reduces fatigue during extended use. Compatible with a wide range of drill bits and accessories.

Categories: POWER TOOLS, Drills & Drivers Tags: 10mm Drill, 500W Drill, Biomedical Engineering, corded drill, Drilling, electric drill, Equipment Maintenance, hand tool, Hospital Maintenance, Maxmech ED 500-10, power tool, screwdriving

Description

Table of Contents

Max Mech Electric Drill

PRIMARY USES

1. Drilling Holes in Wood, Metal, and Masonry for Equipment Installation and Maintenance
Primary Use: A handheld electric power tool (500W, 10mm chuck capacity) used for drilling precise holes in wood, metal, and other materials to install and maintain medical equipment, shelving, handrails, and building fixtures. With a maximum drilling capacity of 20mm in wood and 10mm in steel, it is suitable for most maintenance tasks in a healthcare setting.
How it helps: For the biomedical engineer and maintenance technician, the drill’s keyed or keyless chuck accepts drill bits up to 10mm in diameter, providing versatility for different materials and applications. The reversing function allows for both drilling and screw-driving tasks, making it ideal for assembling and disassembling furniture, installing equipment, and general building maintenance. The compact 1.2kg weight ensures comfortable use and manoeuvrability.

2. Screwdriving and Assembly of Furniture and Equipment
Primary Use: The drill is fitted with a screwdriver bit for driving and removing screws, making it an efficient tool for assembling medical equipment, furniture, and fixtures in healthcare settings .
How it helps: The electric drill’s variable speed trigger and forward/reverse switch allow precise control for screwdriving, reducing the risk of over-tightening and damaging screw heads or materials . This is particularly valuable when assembling sensitive medical equipment that requires precise torque control.

Max Mech Electric Drill Amaris Hardware Solutions

SECONDARY USES

1. Mixing Paints and Adhesives: With a mixing paddle attachment, the drill can be used to thoroughly mix paints, adhesives, and other compounds used in maintenance and decoration.

2. Surface Preparation: The drill can be used with wire brush attachments to remove rust and corrosion from metal surfaces before painting or repair.

3. Deburring and Smoothing: It can be used with abrasive accessories to deburr cut edges of metal pipes and components.

KEY PRODUCT FEATURES

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Portable electric power tool; not a medical device
Designation: Maxmech Electric Drill ED 500-10
Motor Power: 500W
Chuck Capacity: 10mm (3/8 inches)
No-Load Speed: 0-2800 RPM (variable speed)
Drilling Capacity (Wood): Up to 20mm
Drilling Capacity (Steel): Up to 10mm
Weight: Approximately 1.2kg
Power Supply: 220-240V AC, 50Hz (standard for Kenya)
Country of Origin: China

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Rotational drilling and screwdriving
Motor Type: Universal motor (brushed)
Speed Control: Variable speed trigger for precise control
Reversing Function: Yes – forward/reverse switch for drilling and screwdriving
Chuck Type: Keyed or keyless (depending on model)
Cooling: Air-cooled with internal fan
Gears: All-metal gears for durability
Insulation: Double-insulated for electrical safety

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Check the chuck is securely tightened. Select the appropriate drill bit for the material. Ensure the drill is unplugged when changing bits.
Usage Instructions: Mark the drilling location. Plug in the drill and select the appropriate speed. Use a centre punch to create a starting point on metal. Apply firm, steady pressure. Use the reversing function to back out drill bits or remove screws.
Storage Conditions: Store in a dry, secure place.
Ventilation: Motor cooling relies on airflow; ensure vents are not blocked.
Precautions: Always wear eye protection (goggles). Secure the workpiece. Do not wear loose clothing or jewellery.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: Rotating power tool; risk of entanglement, eye injury, and electrical shock.
Eye Protection: Mandatory.
Electrical Safety: Use a Residual Current Device (RCD). Do not use in wet conditions.
Entanglement Hazard: Do not wear loose clothing, gloves, or jewellery that could be caught in the rotating chuck or bit.
Dust Hazard: Silica dust from masonry and metal particles can be harmful; use respiratory protection and dust extraction.
Fire Hazard: Sparks may ignite flammable materials. Clear the work area.
Regulatory: Complies with applicable safety standards

SAFETY HANDLING PRECAUTIONS

1. SAFETY PRECAUTIONS

Personal Protective Equipment (PPE): Always wear safety goggles, hearing protection, and heavy-duty gloves when operating the electric drill.
Electrical Safety: Use a Residual Current Device (RCD) for protection against electric shock. Do not operate in wet conditions or near water. Unplug the tool before changing accessories.
Entanglement Hazard: Avoid wearing loose clothing, jewellery, or gloves that could become entangled in the rotating chuck or bit.
Eye Injury Hazard: Flying debris can cause serious eye injury. Always wear safety goggles. A face shield is recommended for added protection.
Dust Hazard: Some materials generate hazardous dust (e.g., silica from masonry). Use local exhaust ventilation and appropriate respiratory protection.
Maintenance: Unplug the tool before performing any maintenance or cleaning. Regularly inspect the cord and plug for damage.

2. FIRST AID MEASURES

Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean, lukewarm water for at least 15 minutes. Seek medical attention.
Cut Injury: Apply direct pressure to stop bleeding. Clean the wound. Cover with a sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.
Skin Contact (dust): Wash skin with soap and water. If irritation develops, seek medical attention.
Inhalation of Dust: Move person to fresh air. If symptoms persist, seek medical attention.
Electric Shock: Turn off the power supply immediately. If the person is not breathing, begin CPR and call emergency services. Do not touch the person until the power supply has been disconnected.

3. FIRE FIGHTING MEASURES

Flammability: The drill is not flammable, but sparks generated during use can ignite flammable materials. The plastic casing may burn.
Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving the tool.
Fire Response: In the event of a fire, evacuate the area and call emergency services.

Max Mech Electric Drill

Max Mech Electric Drill

PRIMARY USES

SECONDARY USES

1. Mixing Paints and Adhesives: With a mixing paddle attachment, the drill can be used to thoroughly mix paints, adhesives, and other compounds used in maintenance and decoration.

2. Surface Preparation: The drill can be used with wire brush attachments to remove rust and corrosion from metal surfaces before painting or repair.

3. Deburring and Smoothing: It can be used with abrasive accessories to deburr cut edges of metal pipes and components.

1. BASIC IDENTIFICATION ATTRIBUTES

Device Type: Portable electric power tool; not a medical device

Designation: Maxmech Electric Drill ED 500-10

Motor Power: 500W

Chuck Capacity: 10mm (3/8 inches)

No-Load Speed: 0-2800 RPM (variable speed)

Drilling Capacity (Wood): Up to 20mm

Drilling Capacity (Steel): Up to 10mm

Weight: Approximately 1.2kg

Power Supply: 220-240V AC, 50Hz (standard for Kenya)

Country of Origin: China

2. TECHNICAL & PERFORMANCE PROPERTIES

Primary Action: Rotational drilling and screwdriving

Motor Type: Universal motor (brushed)

Speed Control: Variable speed trigger for precise control

Reversing Function: Yes – forward/reverse switch for drilling and screwdriving

Chuck Type: Keyed or keyless (depending on model)

Cooling: Air-cooled with internal fan

Gears: All-metal gears for durability

Insulation: Double-insulated for electrical safety

3. PHYSICAL & OPERATIONAL PROPERTIES

Preparation: Check the chuck is securely tightened. Select the appropriate drill bit for the material. Ensure the drill is unplugged when changing bits.

Usage Instructions: Mark the drilling location. Plug in the drill and select the appropriate speed. Use a centre punch to create a starting point on metal. Apply firm, steady pressure. Use the reversing function to back out drill bits or remove screws.

Storage Conditions: Store in a dry, secure place.

Ventilation: Motor cooling relies on airflow; ensure vents are not blocked.

Precautions: Always wear eye protection (goggles). Secure the workpiece. Do not wear loose clothing or jewellery.

4. SAFETY & COMPLIANCE ATTRIBUTES

Safety Classification: Rotating power tool; risk of entanglement, eye injury, and electrical shock.

Eye Protection: Mandatory.

Electrical Safety: Use a Residual Current Device (RCD). Do not use in wet conditions.

Entanglement Hazard: Do not wear loose clothing, gloves, or jewellery that could be caught in the rotating chuck or bit.

Dust Hazard: Silica dust from masonry and metal particles can be harmful; use respiratory protection and dust extraction.

Fire Hazard: Sparks may ignite flammable materials. Clear the work area.

Regulatory: Complies with applicable safety standards

1. SAFETY PRECAUTIONS

Personal Protective Equipment (PPE): Always wear safety goggles, hearing protection, and heavy-duty gloves when operating the electric drill.

Electrical Safety: Use a Residual Current Device (RCD) for protection against electric shock. Do not operate in wet conditions or near water. Unplug the tool before changing accessories.

Entanglement Hazard: Avoid wearing loose clothing, jewellery, or gloves that could become entangled in the rotating chuck or bit.

Eye Injury Hazard: Flying debris can cause serious eye injury. Always wear safety goggles. A face shield is recommended for added protection.

Dust Hazard: Some materials generate hazardous dust (e.g., silica from masonry). Use local exhaust ventilation and appropriate respiratory protection.

Maintenance: Unplug the tool before performing any maintenance or cleaning. Regularly inspect the cord and plug for damage.

2. FIRST AID MEASURES

Eye Injury (debris): Do not rub. Rinse immediately with plenty of clean, lukewarm water for at least 15 minutes. Seek medical attention.

Cut Injury: Apply direct pressure to stop bleeding. Clean the wound. Cover with a sterile dressing. Seek medical attention if bleeding is profuse or the wound is deep.

Skin Contact (dust): Wash skin with soap and water. If irritation develops, seek medical attention.

Inhalation of Dust: Move person to fresh air. If symptoms persist, seek medical attention.

Electric Shock: Turn off the power supply immediately. If the person is not breathing, begin CPR and call emergency services. Do not touch the person until the power supply has been disconnected.

3. FIRE FIGHTING MEASURES

Flammability: The drill is not flammable, but sparks generated during use can ignite flammable materials. The plastic casing may burn.

Extinguishing Media: Use water spray, foam, dry chemical powder, or carbon dioxide (CO₂) for fires involving the tool.

Fire Response: In the event of a fire, evacuate the area and call emergency services.

Related products

BRANDS

FOLLOW US